Programming The Automatic Switch-On Time; Programming The Automatic Switch-Off Time - Jura Impressa xf70 Instructions For Use Manual

The illuminated ring (2) is active.
Turn the Rotary Switch (1) until TIME is displayed.
TIME
Now press the Rotary Switch (1) to start programming the time.
--:--
Turn the rotary Switch (1) to adjust the hours..
12:--
Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
12:--
Turn the Rotary Switch (1) to select the minutes.
2:05
Press the Rotary Switch (1) to save the setting.
TIME
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY
If the machine is disconnected from power supply, the time
must be programmed again.

15.7 Programming the automatic switch-on time

You must programme the time (Chapter 15.6) if you want to
use the automatic switch-on function.
READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until MACHINE ON is displayed.
MACHINE ON
Now press the Rotary Switch (1) to start programming the
switch-on time.
--:--
Turn the Rotary Switch (1) to adjust the hours.
12:--
Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
12:--
Turn theRotary Switch (1) to select the minutes.
12:05
Press the Rotary Switch (1) to save the setting.
MACHINE ON
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.8 Programming the automatic switch-off time

You can programme your coffee machine such that it will
switch off automatically after a certain time. You can pro-
gramme the switch-off time in a range between 0.5 and 9
hours, or select ––:–– (i.e. inactive).
READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until OFF AFT. HR is displayed.
E
17