Programming Display 24H/Am/Pm; Programming The Display For Ml/Oz; Exit Programming Mode - Jura Impressa xf70 Instructions For Use Manual

LANGUAGE
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.11 Programming Display 24H/AM/PM

READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until
DISPLAY appears
Press the Rotary Switch (1)
ML/OZ appears
Turn the Rotary Switch (1) until
24H/AM PM appears
Press the Rotary Switch (1)
e.g. 24H
Select a setting of your choice.
Press the Rotary Switch (1) to save the setting.
DISPLAY
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.12 Programming the display for ML/OZ

READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until
DISPLAY appears
Press the Rotary Switch (1)
ML/OZ appears
Press the Rotary Switch (1)
e.g. ML
Select a setting of your choice.
Press the Rotary Switch (1) to save the setting.
DISPLAY
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READY

15.13 Exit programming mode

READY
Press the Rotary Switch (1) until
FILTER – / appears
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until
EXIT appears
Press the Rotary Switch (1) to leave the programming mode.
READYM
E
19