Cleaning Without Display Request; De-Scaling - Jura Impressa xf70 Instructions For Use Manual

READY
CLEAN
Touch the symbol (7).
EMPTY
TRAY
Empty the tray (Fig. 18/19).
NO
TRAY
Insert the tray (20) again.
Remove the drip grate (19).
Place a sufficiently large receptacle (Fig. 11) under the coffee
spout (17).
PRESS
MAINT.
Touch the symbol (7).
CLEANING
FILL
TABLET
Fill in the tablet (see Fig. 14)
PRESS
MAINT.
Touch the symbol (7).
CLEANING
EMPTY
TRAY
NO
TRAY
READY
Wipe coffee powder tank with a dry cloth after the cleaning
program has finished.
The cleaning operation was completed successfully.
22

17.1 Cleaning without display request

Press the Rotary Switch (1) until
FILTER – / appears.
Turn the Rotary Switch (1) until
MAINTENANCE appears.
Press the Rotary Switch (1) to confirm.
RINSE
Turn the Rotary Switch (1) until
CLEAN appears.
Press the Rotary Switch (1) again to confirm.
EMPTY TRAY
The program "Clean" is now active. Now proceed as described
in Chapter 17 from

18. De-scaling

Your IMPRESSA features an integrated de-scaling program. The
cleaning operation will take some 40 min.
JURA de-scaling tablets which are specially designed for the
de-scaling program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate de-scaling agents.
If the IMPRESSA needs de-scaling, the corresponding mes-
sage is displayed.
You can still draw off coffee or hot water/steam and start the
de-scaling program later.
Before starting the de-scaling program, the machine must be
switched off. Once started, the de-scaling operation must not
be interrupted.
EMPTY TRAY onwards.