Troubleshooting Charts; Error Codes And Screen Messages - IBM ThinkPad 760E Instruction Manual

Troubleshooting Charts

In the charts, x can be any character.

Error Codes and Screen Messages

Screen Message and Its
Meaning
I9990301
I9990302
I9990305
(Incorrect connection of
the hard disk drive can
cause these error codes
to appear.)
I99 xxxxx
(Except the above
I999030x errors)
111
(Docking station error)
The computer cannot find the startup drive. Do the following:
1. Turn off the computer.
2. Press and hold F1; then turn on the computer to start Easy-Setup. Hold F1
until the Easy-Setup menu appears.
3. Select the Start up icon. If you are unable to set the startup sequence,
have the computer serviced.
4. Check the list of devices on the startup sequence box. Is the default drive
listed in the startup sequence box?
Yes Exit this screen, and turn off the computer.
No Select the Reset icon.
5. Is an operating system installed?
Yes Go to step 7.
No Install operating system in your computer.
6. After the operating system is installed, turn off the computer.
7. Turn on the computer.
If the same screen message appears, have the computer serviced.
Have the computer serviced.
If you are using a port replicator or a docking station, disconnect it; then
reconnect it.
If there is still a problem, have the computer serviced.
Troubleshooting
Action
Chapter 8. Solving Computer Problems
235