Installing The Enhanced Video/ M Peg Device Driver And The Video Cd Player For Windows 95; Installing The Video Overlay/ C Apture Device Driver For Windows 95 - IBM ThinkPad 760E Instruction Manual

Installing Windows 95 Software
Installing the Enhanced Video/ M PEG Device Driver and the
Video CD Player for Windows 95

Installing the Video Overlay/ C apture Device Driver for Windows 95

212
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To use the Enhanced Video functions in Windows 95, you must
760
E V
i d eo
nh
install the ThinkPad display driver (Cyber...) and the Mwave DSP
support software before installing the Enhanced Video device
drivers.
The Video Overlay/ C apture device driver enables the video in-out
port and Video for Windows (a standard component in Windows 95)
or its compatible software.
To install the Video Overlay/ C apture device driver for Windows 95:
1
Start Windows 95; then click on My Computer, Control Panel,
and then Add New Hardware.
2
Click on Next> ; then select No to the question Search for your
new hardware? .
3
Click on Next> ; then select Sound, video, and game
controllers.
4
Click on Next> ; then click on Have Disk.
5
Insert the MPEG/ V ideo Capture Driver Diskette for Windows 95
into the diskette drive; then select OK.
6
Install all the drivers listed on the screen.
You cannot install multiple drivers at the same time.
7
After the installation is complete, remove the diskette from the
diskette drive.
8
Restart the computer to make the video overlay/ c apture device
driver effective.
To use the video capture and playback functions, refer to the
Windows 95 documentation or your video capture/ p layback software
manual.