Installing The Enhanced Video/ M Peg Device Driver And The Video Cd Player For Windows 3.11; Installing The Video Overlay/ C Apture Device Driver For Windows 3.11 - IBM ThinkPad 760E Instruction Manual

Installing the Infrared Device Driver for Windows 3.11
Note:
When installing an operating system,
you need to install the Infrared
device driver.
Installing the Enhanced Video/ M PEG Device Driver and the
Video CD Player for Windows 3.11

Installing the Video Overlay/ C apture Device Driver for Windows 3.11

To install the infrared device driver:
1
Start Windows; then insert the Infrared Features Diskette into
the diskette drive.
2
Go to the DOS command prompt; then type A:UINSTALL and
press Enter.
The following screen appears:
Type the SOURCE drive letter (A-Z). When you install a program, the
SOURCE drive letter is the location you are installing FROM.
Source Drive ...
Enter F1=Help F3=Exit
3
Press Enter; then follow the instructions on the screen.
Select Install Windows ThinkPad InfraRed Driver when you
are asked.
To use the Enhanced Video functions in Windows 3.11, you must
760
E V
i d eo
nh
install the ThinkPad display driver (Cyber...) and the Mwave DSP
support software before installing the Enhanced Video device
drivers.
The Video Overlay/ C apture device driver enables the video in-out
port on Video for Windows or compatible software. Install Video for
Windows or compatible software; then do the following to install the
video overlay/ c apture device driver:
1
Start Windows.
Installing Windows 3.11 Software
Installation Options
Installation Source Drive
Chapter 7. Installing Software
197