Installing The Pc Card Director For Windows 95; Disabling The Pc Card Director For Dos And Windows - IBM ThinkPad 760E Instruction Manual

Installing Windows 95 Software

Installing the PC Card Director for Windows 95

Note:
The ThinkPad computer has three
different sets of PCMCIA Feature
software: one for DOS/ W indows, one
for OS/ 2 Warp, and one for Windows
95.
Note:
CardBus PC Cards cannot be used
in Windows 95.

Disabling the PC Card Director for DOS and Windows

204
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
ThinkPad Features program using the Utility Diskette for
Windows supplied with the computer:
1
Insert ThinkPad Utility Diskette for Windows into the
diskette drive.
2
Click on Start; then click on Run....
3
Type a:INSTALLW and click on OK.
Follow the instructions on the screen.
The following is a summarized procedure to use the PCMCIA
features in Windows 95 ( e ach step is explained in detail later):
1. If you have already installed the PC Card Director for DOS and
Windows, disable it ( e nable the Windows 95 Integrated PCMCIA
support software).
2. Install the Socket Services device driver.
3. Install the PC Card Director for Windows 95.
If the PC Card Director for DOS and Windows has been already
installed on your computer, you must remove the PC Card Director
for DOS and Windows before installing the PCMCIA support software
for Windows 95. This is because the Windows 95 installation
program does not automatically remove the PC Card Director for
DOS and Windows.
To remove the PC Card Director for DOS and Windows, do the
following ( t his procedure also enables the Windows 95 Integrated
PCMCIA support software):
1
Start Windows 95; then select My Computer, Control Panel,
and then PC Card.
2
Select No for the question "Are you using a PC card to install
Windows?" and click on Next.