Using The Audio Function For Windows; Using The Audio Function For Dos - IBM ThinkPad 760E Instruction Manual

Using the Mwave Audio Function

Using the Audio Function for Windows

WIN
WIN
Note:
To use the Mwave audio features in
WIN-OS/ 2 , install the Mwave DSP
support software for Windows in the
full screen WIN-OS/ 2 session.
To install the Mwave DSP support
software:
Chapter 7.

Using the Audio Function for DOS

54
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To use Mwave audio in Windows, open an audio application such as
WIN
Media Player or Sound Recorder in the Windows Accessories
group.
To control the audio input or output, do the following:
1
Select Mwave ThinkPad from Windows.
2
Select Audio Control. The following windows appears:
INPUT SOURCE
Mic
Line
CD
Mute
This window allows you to maintain control over volume, balance,
tone, and effects for all audio components and input sources. For
more information, see Mwave Help in the Mwave ThinkPad window.
The Mwave feature supports audio for DOS games through Sound
DOS
Blaster support.
To enable Sound Blaster support for DOS games:
1
Type FASTCFG at the command prompt; then press Enter.
The FASTCFG utility opens.
2
Select Games; then select OK.
Mwave Audio Mixer
GAMES WAVE MIDI MASTER
Mute Mute Mute Mute
Controls Viewed:
Play Record
Treble Bass
Tone Control
QSound
Chorus Reverb
Effects