Installing The Pc Card Director For Os/ 2 - IBM ThinkPad 760E Instruction Manual

Installing OS/ 2 Software

Installing the PC Card Director for OS/ 2

To use PC Card Director:
Page 44.
Note:
CardBus PC Cards cannot be used
in OS/ 2 Warp.
178
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
6
Install the DOS ThinkPad Features program to use the PS2
commands.
a) Exit the WIN-OS/ 2 full screen; then open a DOS full screen.
b) Follow the instructions in "Installing the ThinkPad Features
Program for DOS" on page 187.
When installing an operating system, you need to install the
following device drivers and software associated with PCMCIA
before you can use the PC Cards:
PC Card device drivers:
– Card Services device driver
– Socket Services device driver
– Resource Map Utility device driver
– PC Card Power Management device driver
– PC Card Director utility
PC Card client device drivers ( o nly when PC Card Director does
not support the PC Card)
To install the PC Card Director:
1
Start OS/ 2 Warp; then open the OS/ 2 full screen command
prompt.
2
Insert the PC Card Director Diskette for OS/ 2 and Windows 95
into the diskette drive; then type A:\PCMINST2 and press Enter.
Follow the instructions on the screen.
3
Click on OK when you have completed the installation.
4
After the installation is complete, close all applications, remove
the diskette from the diskette drive, and restart the computer.