Installing The Thinkpad Features Program For Dos - IBM ThinkPad 760E Instruction Manual

Installing the ThinkPad Features Program for DOS

Note:
When installing an operating system,
you need to install the ThinkPad
Features program.
Note
For the software parameter in the AUTOEXEC.BAT file, refer
to the README file in the CD-ROM Driver Diskette.
If you are using DOS SMARTDRV caches and planning to
use a photo CD or multisession discs, you have to add the
/U parameter to the SMARTDRV line in the AUTOEXEC.BAT
file. This is because photo CDs or multisession discs are not
compatible with the SMARTDRV caches.
To be able to play CD-i movies in Windows 3.11, do not
cache the CD-ROM drive by the SMARTDRV Version 5.0 or
5.1, which is supplied with PC DOS Version 7.0.
To install the ThinkPad Features program:
1
Start DOS.
2
Insert the Utility Diskette for DOS into the diskette drive; then
type A:UINSTALL and press Enter.
The following screen appears:
Installation Source Drive
Type the SOURCE drive letter (A-Z). When you install a program, the
SOURCE drive letter is the location you are installing FROM.
Source Drive ...
Enter F1=Help F3=Exit
3
Press Enter.
4
Select Install DOS ThinkPad Features at the Installation
Options screen; then follow the instructions on the screen.
Installing DOS Software
Installation Options
Chapter 7. Installing Software
187