Changing A Power-On Password; Removing A Power-On Password - IBM ThinkPad 760E Instruction Manual

Using a Power-On Password

Changing a Power-On Password

Removing a Power-On Password

104
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
You must change your power-on password at the password prompt
screen that appears when you turn on the computer. To change a
power-on password, at the power-on password prompt (
do the following:
1
Type your current power-on password; then press the
Spacebar.
2
Type the new password; then press the Spacebar.
Use no more than 7 characters.
3
Type the new password again to verify it; then press Enter.
The new password will be available when you turn on the computer
the next time.
Do Not Forget Your Power-On Password!
If you forget your power-on password, you cannot reset it. You
have to take the computer to an IBM authorized reseller or IBM
marketing representative to have the password canceled. Proof
of purchase is required, and an additional charge might be
required for the service.
You must remove your power-on password at the password prompt
that appears when you turn on the computer. To remove a power-on
password, at the power-on password prompt (
password, press the Spacebar, and then press Enter.
) screen,
), type your current