IBM ThinkPad 760E Instruction Manual page 292

System Resources
System Resources
SCSI Controller in
Dock II
SCSI Controller in
SelectaDock Docking
System
IDE hard disk drive or
IDE CD-ROM drive in
the Docking Station
ISA adapter card
(option card) in the
docking station
PCI adapter card
(option card) in the
SelectaDock Docking
System
Note:
Select an IRQ and
the memory addresses
with the jumper and
DIP switches on the
system board of the
Dock I or Dock II. See
"Using SCSI Controller
and Support Software"
in the Dock I User's
Guide or Dock II
User's Guide . Do not
select Disabled when
OS/ 2 is used.
274
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
IRQ I/O Address (Hex)
11, 9, 10, or 12 340–35F or 140–14F
11, 3, 4, 5, 7, 9, (Automatically set by the
10, 15, or system)
disabled
15 0170–0177 and 0376–0377
(Refer to manual that came with the adapter card.)
11, 3, 4, 5, 7, 9, (Refer to manuals that came with the adapter card.)
10, 15, or
disabled
Note: Note:
Enhanced Addresses in the
Video features parentheses are also used
and PCI adapter when ECP is enabled by the
card in the ThinkPad Features program
SelectaDock as the printer operating mode.
Docking System
Memory-mapped I/ O
share the same
IRQ11.
Sound Blaster
and MIDI share
the same IRQ.
Memory Address DMA
(Hex) Channel
DC000–DFFFF, None
CC000–CFFFF,
C8000–CBFFF,
D0000–D3FFF,
D4000–D7FFF,
D8000–DBFFF, or
disabled
None None
None None
Note: Note:
Memory upper than When you
the system memory enable ECP
will be automatically as the printer
set by the system. operating
mode by
ThinkPad
Features
program,
one of the
choices
(including
"disabled")
must be
selected.