Installing The Mwave Midi Sample Files - IBM ThinkPad 760E Instruction Manual

Installing Windows 95 Software

Installing the Mwave MIDI Sample Files

Installing the AudioDrive Support Software for Windows 95
208
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
Encounter a problem?
If you encounter a problem when using the Mwave DSP features
for Windows 95 after installation, verify that "C:\MWW\DLL" is
included in the PATH statement of AUTOEXEC.BAT.
To play MIDI files on your computer, install the Mwave MIDI sample
files as follows:
1
Start Windows 95; then click on Start, and then Run....
2
Insert the MIDI Samples Diskette 1 into the diskette drive; then
type A:SETUP and press Enter.
The Mwave installation window appears and prompts you to
input the destination directory for the software. If the default
directory is OK, press Enter. Otherwise, type a directory name
and press Enter.
3
Follow the instructions on the screen. After the installation is
completed, remove any diskette from the diskette drive; then
restart Windows 95.
When you install Windows 95, it might detect the AudioDrive chip
760
ESS
installed in your computer, and automatically install the required
audio software in your hard disk drive. However, the version of the
AudioDrive support software supplied with Windows 95 might be an
earlier version than the one needed for your computer.
In any case, you should reinstall the AudioDrive support software as
follows:
1
Start Windows 95; then open My Computer.
2
Click on Control Panel and then System to open the System
Properties window.
3
Click on the Device Manager tab; then double-click on Sound,
video, and game controllers from the list.