Installing The Pc Card Director For Dos - IBM ThinkPad 760E Instruction Manual

Installing DOS Software

Installing the PC Card Director for DOS

Note:
Do not install the Phoenix **
support in IBM PC DOS 7.0.
PC Card Director:
Page 44.
Note:
The PC Card client device driver is
not part of the preloaded software.
Refer to the manual that came with
the PC Card to install the device
driver.
Note:
Whenever you update the
CONFIG.SYS file, see page 279.
188
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
When installing DOS, you need to install the following software to
PCMCIA
use the PC Cards:
PC Card device drivers:
– Card Services device driver
– Socket Services device driver
– Resource Map Utility device driver
– PC Card Power Management device driver
– PC Card Director utility
PC Card client device drivers ( o nly when PC Card Director does
not support the PC Card)
To install the PC Card Director:
1
Start DOS.
2
Insert the PC Card Director Diskette for DOS and Windows into
the diskette drive; then type A: and press Enter.
3
Type PCMINSTD; then press Enter.
4
Follow the instructions on the screen.
Default choices are already highlighted at the Selector screens.
5
After the installation is complete, remove any diskette from the
diskette drive and restart the computer.