Using The Set Advanced Features; From The Set Advanced Features Menus; From The Command Line - IBM ThinkPad 700 PS/2 Reference Summary

Using the Set Advanced Features
If your computer already has the Set Advanced
Features installed, you can start the Set Advanced
Features with either of the following methods:
• From the Set Advanced Features Menus
• From the command line
From the Set Advanced Features Menus
At the command prompt, type \PS2 and press
Enter. The Set Advanced Features Menu appears.
Select the desired item from this menu.
From the Command Line
At the command prompt, enter the PS2 command
as shown:
PS2 [Parameter1] [Parameter2]
Parameter1
SET
?
I
Help
Parameter2
BEep
DEFAULT
DISCHARGE
DISK
Meaning
Stores the command you
enter, and remains in the
computer memory even if
the power switch is turned
off.
Displays the format of all
available commands.
Options
ON
I
Off
XX minutes (0-20)
10 Reference Summary
DISPiay Color I Mono
LCd XX minutes (0-20)
LOw battery alarm
ON I Off
MODEM
ON I Off
OFF
ON at HH:MM:SS
I
Clear
Power XX minutes (0-20)
screen
HCRTJLCDJCRTJBOTHI
HLCD
SErial
ON
I
Off
SPeed
AUTO! MAX
VEXPansion
ON
I
Off
TRAVEL
The following are some command examples.
Command
PS2
PS2 OFF
Meaning
Main Menu
Displays the Set Advanced
Features Main Menu.
Suspend Mode
Immediately enters suspend
mode.
Resuming Normal Operation
PS2 ON 19:15:01
PS2 ON
Resumes normal operation
at 7:15:01 p.m.
Shows the current setting of
resume time.
11