Table of Contents
Advertisement
Atomic Blade
This blade was designed to provide excellent leaf mulching.
Attributes: Excellent leaf mulching
The Diagnostic Light
The machine is equipped with a diagnostic light which
indicates if the machine detects a malfunction. The diagnostic
light is located on the InfoCenter, above the display screen
(Figure
21). When the machine is functioning properly and
the key in the ignition switch is turned to the O
position, the diagnostic light will turn on briefly to indicate the
light is working properly. When a machine advisory message
is displayed, the light will illuminate when the message is
present. When a fault message is displayed, the light will blink
until the fault is resolved.
1
Figure 21
1. Diagnostic light
Changing the Counterbalance
Settings
During different times of the mowing season or when turf
conditions vary, the amount of counterbalance (upward lift)
required on the cutting decks can be changed to meet the
conditions.
1. Position the machine on a level surface, lower the
cutting decks, turn the key in the ignition switch to the
O
position, and engage the parking brake.
FF
2. Turn the key in the ignition switch to the R
3. In the InfoCenter Settings Menu, scroll down to
Counterbalance.
4. Press the right button to select counterbalance and
change between the low, medium, and high settings.
Note: Once the adjustment has been completed, move
the machine to a test area and operate the machine with
the new setting. The new counterbalanced setting may
change the effective height of cut.
/R
N
UN
g021272
position.
UN
25
Advertisement
Table of Contents
