Table of Contents
Advertisement
Key Switch
The key switch
(Figure
12) has 3 positions: O
O
/P
, and S
N
REHEAT
TART
Lower Mow/Raise Control Lever
This lever
(Figure
12) raises and lowers the cutting decks
and also starts and stops the mowers when the mowers are
enabled in the mow mode. When starting the decks in the
down position, this lever will turn the decks on if the PTO
and the mow speed limiter are engaged.
Enable/Disable Switch
Use the enable/disable switch
the lower mow/raise control lever to operate the mowers.
The mowers cannot be lowered when the mow/transport
lever is in the transport position.
Hydraulic-Filter-Restriction Indicator
With the engine running at normal operating temperature,
view the indicator
(Figure
When the indicator is in the red zone, change the hydraulic
filters.
Figure 13
1. Hydraulic-filter-restriction indicator
Power Point
The power point is a 12 V power supply for electronic devices
(Figure
14).
,
FF
.
(Figure
12) in conjunction with
13), it should be in the green zone.
1. Power point
Using the InfoCenter LCD Display
The InfoCenter LCD display shows the operating status,
various diagnostics, and other information about the machine
(Figure
15). There is a splash screen and main information
screen in the InfoCenter. Press any of the InfoCenter buttons
and then select the appropriate directional arrow to switch
between the splash screen and the main information screen.
1
4
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press to access
the InfoCenter menus. You can use it to back out of any
menu you are currently using.
•
Middle Button—press to scroll down menus.
•
Right Button—press to open a menu where a right arrow
indicates additional content.
Note: The purpose of each button may change depending
on what is required at the time. Each button is labeled with
an icon displaying its current function.
16
Figure 14
g020650
2
3
Figure 15
3. Middle button
4. Left button
Advertisement
Table of Contents
