Copying Using The Stack Bypass - Canon imageRUNNER 2545i Copying Manual

NOTE
• The paper sizes and types in each paper source are indicated on the touch panel
display.
• The type of paper loaded in each paper source are displayed by icons. (See
Chapter 3, "Configuring the Machine's Basic Settings," in the Reference Guide.)
•
indicates that the paper is loaded vertically, and
loaded horizontally. The suffix <R> (such as in A4R), used in paper size designations,
indicates that the paper is loaded in a paper drawer or the stack bypass horizontally.
• You can load envelopes in Paper Drawer 2 only when the optional Envelope Feeder
Attachment-D1 is attached to the machine. For more information, see Chapter 4,
"Optional Equipment," in the Reference Guide.
3
Enter the desired copy quantity (from 1 to 999) using
- (numeric keys).
4
Press
Copying starts.

Copying Using the Stack Bypass

IMPORTANT
If Stack Bypass Standard Settings is set to 'On', the specified paper size and type are
applied as the default settings regardless of the actual paper size and type of the
paper loaded in the stack bypass. Be sure to disable or change the settings when you
are loading paper of different size/type from the currently specified size/type. (See
Chapter 3, "Configuring the Machine's Basic Settings," in the Reference Guide.)
1
IMPORTANT
If you use A5 paper, place it horizontally. Placing it vertically may cause paper jams.
NOTE
For instructions on how to load paper/envelopes into the stack bypass, see Chapter 2,
"Basic Operations," in the Reference Guide.
(Start).
indicates that the paper is
Load the paper into the stack
bypass.
By loading paper or envelopes, the screens
for specifying the paper size and type will
be displayed.
Selecting the Paper Size
2
2-5