Canon imageRUNNER 2545i Copying Manual page 50

■ 1 to 2-Sided
The 1 to 2-Sided mode enables you to make two-sided copies from one-sided
originals.
IMPORTANT
• The 1 to 2-Sided mode cannot be used with the 2-Page Separation mode.
• Make sure to place originals with a horizontal (landscape) orientation, such as A4R,
horizontally. If these originals are placed vertically, the back side of the original is
copied upside down.
NOTE
• If there is an odd number of originals, the back side of the last copy is left blank. (The
machine's counter does not count the blank page as one copy.)
• If the 1 to 2-Sided mode is used with the Different Size Originals mode, the copies of
differently sized originals will be printed as one-sided copies on paper of their
respective sizes. If you want to make two-sided copies with differently sized originals,
you must select the paper size beforehand. (See "Manual Paper Selection," on p. 2-4.)
• If the 1 to 2-Sided mode is used when the 2 on 1 mode in the Image Combination
mode is set to 'On' for copying four-page originals, two pages of the original are
printed on one side of the paper, and the other two pages are printed on the other
side.
■ 2 to 2-Sided
The 2 to 2-Sided mode automatically turns over two-sided originals placed in the
feeder to copy both sides of the original on the front and back sides of the paper.
Original
Original
Copy
Copy
2-Sided Copying
2
2-21