Canon imageRUNNER 2545i Copying Manual page 99

NOTE
• Keys that already have settings stored in them are displayed with a black square (■) in
the lower right corner of the key.
• If you select a key that already has settings stored in it, the settings are displayed.
• If there are more stored copy settings than are currently displayed, you can scroll
through the list by pressing [ ] or [ ].
4
3
5
Press [Cancel] ➞ [Done].
The display returns to the top screen.
NOTE
When a memory key is not in use, as is the case when you delete its settings, [OK] is
grayed out and you must press [Cancel] ➞ [Done] to complete the procedure.
3-36
Frequently Used Settings (Mode Memory)
Press [Yes].
To cancel erasing the settings, press [No].
The message <Erased.> appears for
approximately two seconds on the touch
panel display.
The stored copy settings are erased.
NOTE
Key names are not erased. For
instructions on how to change a key
name, see "If you want to name the
mode memory setting:," on p. 3-33.