Canon imageRUNNER 2545i Copying Manual page 83

3
4
3
NOTE
• The default setting is '18 mm'. You can adjust the frame erase width to between 3 mm
and 20 mm.
• When entering values in millimeters, you can also use
• To enter values in inches, see Chapter 3, "Configuring the Machine's Basic Settings,"
in the Reference Guide.
5
Enter the desired copy quantity (from 1 to 999) using
6
Press
Copying starts.
NOTE
• To cancel this setting, press [Special Features] ➞ [Frame Erase] ➞ [Cancel].
• To cancel all settings and return the machine to the Standard Settings, press
3-20
Erasing Shadows/Frame Lines (Frame Erase)
(Clear) on the control panel.
- (numeric keys).
(Start).
(Reset).
Select the side where the binding
holes are located ➞ press [Next].
[Top], [Left], [Right], and [Bottom] on the
display refer to the positions of your
originals when you place them on the
platen glass.
Press [-] or [+] to set the frame
erase width ➞ press [OK] ➞
[Done].
The display returns to the top screen.
- (numeric keys) and