Sharpness Control ( Menu => Camera =>Shapeness); Digital Zoom ( Menu => Camera =>Digital Zoom); Night Shot Menu ( Menu => Camera =>Night Shot) - Honeywell ScanDome iii HSDC-251N/P Operation & Programming Manual

Select BMB operated area depending on circumstance, for using BMB more effectively. Screen
is divided 16 areas, each area is set separately.
3.4.5 SHARPNESS CONTROL ( MENU => CAMERA =>SHAPENESS)
The higher, the more enhanced edges in the picture. (0~15).
3.4.6 DIGITAL ZOOM ( MENU => CAMERA =>DIGITAL ZOOM)
OFF - Optical zoom only
2x, 4x, Max. - Digitally magnifies up to 2x, 4x 10x respectively.
3.4.7 NIGHT SHOT MENU ( MENU => CAMERA =>NIGHT SHOT)
The NIGHT SHOT option removes the IR Cut filter of the camera and makes the camera
sensitive to near infrared.
If NIGHT SHOT mode of the selected camera is set to Manual, 10+ ON will enable the NIGHT
SHOT mode, 10+ OFF will turn off the NIGHT SHOT mode.
MODE : MANUAL / AUTO
BLC/BMB SETUP
BLC : BMB
BLOCK SET
1 2 3 4
01 - - - -
02 - * * -
03 - * * -
04 - - - -
SET→FAR/NEAR,EXIT→ESC
SELECT→TELE/WIDE
PREVIEW→OPEN/CLOSE
NIGHT SHOT SETUP
MODE
LOCAL CONTROL
EXIT
AUTO – Camera automatically goes into B&W mode at low light.
: MANUAL
: OFF
31