North Direction ( Menu => Screen => North Direction); Zone Title ( Menu => Screen => Zone Title) - Honeywell ScanDome iii HSDC-251N/P Operation & Programming Manual

Table of Contents

7. Select the Save and Exit option by pushing the Joystick up or down. Save and exit the

program by pushing the Joystick to the right. Press ESC to exit the program without

saving.

Press the HOME orOff button to delete programmed privacy zone.

3.3.3 NORTH DIRECTION ( MENU => SCREEN => NORTH DIRECTION)

Push the joystick handle to the right to select NORTH DIRECTION options.

1. Select DISPLAY option whether display or not.

2. Move to POSITION item to set north direction, press and down the SHFT/PGM key and

then use the Joystick (direction and zoom) until you get desired direction. Release the

key then current pan angle will be displayed on position item. (Or twist zoom handle or hit

zoom button to start PTZ control for view selection and hit the Focus button to exit from

control mode.)

3.3.4 ZONE TITLE ( MENU => SCREEN => ZONE TITLE)

Enter a specific name in sectioned angle between START and END.

DISPLAY : ON/OFF zone title on the screen

1. Press MENU => SCREEN => ZONE TITLE to display zone title menu on the monitor.

2. Select the zone number by pushing the Joystick up or down. Select Start, End or number

column to be set by pushing the handle to the right or left. The selected column will be

highlighted.

NORTH DIRECTION

DISPLAY

POSITION

SAVE AND EXIT

ZONE TITLE

DISPLAY : ON

TITLE

01 WINDOW

SAVE AND EXIT

: OFF

: 000.0

01/04

START

END

123.4 345.6

----- -----

Table of Contents

Scandome iii hsdc-231n/p