Chapter 3 - Program And Operation; Function - Honeywell ScanDome iii HSDC-251N/P Operation & Programming Manual

Chapter 3 — Program and Operation
Dome Camera Selection
Before you start programming or operating a dome camera, you should make the dome camera
be under control of the joystick controller. In other words, the dome camera that you want to
effect changes must be currently selected.
Example: Pressing 1 , 6 and CAM key sequentially will select dome camera 16. The selected
dome camera ID will be displayed on the monitor.
Principle of joystick usage in the programming (editing) mode
Button or Joystick movement in menu
Joystick left or right
Joystick up or down
Joystick down
Zoom handle twist
SHFT + Joystick
Home or Off button

3.1 FUNCTION

Pressing the MENU button on the keyboard controller, the following On-screen MAIN MENU will
be shown on your monitor screen.
ESC
MAIN MENU
FUNCTION
ALARM
SCREEN
CAMERA
SETUP
EXIT
Function
Go into the sub-menu items.
Execute the command(exit)
Change value.
Navigate through the menu items.
Navigate through the menu items.
Finish editing title.
Change value.(Increase / Decrease)
Enter editing title mode.
PTZ control mode.
Escape from the menu without change.
Delete value or name of the field.
16