Table of Contents
Advertisement
WMS Unicast
Parameters
External WMS
Max Clients
UDP Block Size
Host URL
Chapter 3 • Editing Channel Parameters
Settings
<None> (default)
IP address of an external WMS
server you may have
configured for this channel.
0 - 10 (default is 10)
1024 - 20000
(default is 0 for Automatic)
For example:
mms://MGW2400/Test0
Table 32: WMS Unicast Target Parameters
Comments
No external WMS server
is used.
If you wish to use an
external WMS server,
choose the desired
server's IP address from
the list. This WMS server
must belong to the same
workgroup as MGW 2400.
If you do not find the
desired server's IP
address, go to the
External WMS page in
order to add it to the
Servers list. Refer to page
64 for instructions.
Enter the max. number of
clients allowed to receive
the stream at the same
time.
We recommend setting
the UDP Block Size value
to 0 for Automatic.
The UDP Block Size
depends on the video and
audio bit-rates. The
values set by MGW 2400
can be found at page 113.
This field shows when the
channel is running.
It displays the URL
required to configure the
Windows Media Player for
playing back this channel.
For further information on
playing unicast streams
and specifying the correct
URL, refer to page 93.
89
Advertisement
Table of Contents
