Table of Contents
Advertisement
Displaying TCP/IP Settings
MGW 2400 lets you view the TCP/IP settings for both NICs.
To view TCP/IP settings, do the following:
1.
If you changed TCP/IP settings, make sure that you first
restart MGW 2400; otherwise you will not be able to view
them.
2.
Log on to MGW 2400's Configuration Utility as
Administrator; the Main menu appears.
3.
Press 3 (Display TCP/IP Settings); MGW 2400's TCP/IP
settings display for both NICs.
4.
Press any key to return to the Main menu.
Figure 16: Displaying the TCP/IP settings for NIC A and B
Chapter 2 • Initial Configuration
37
Advertisement
Table of Contents
