Table of Contents
Advertisement
Chapter 3 • Editing the Channel Profile
80
To activate a configuration:
•
Select the desired configuration and click Activate
; the selected configuration is activated.
To reload a configuration after restarting MGW 2400:
•
Select the desired configuration and click Auto Start
; the selected configuration reloads after restarting
MGW 2400. It may take several minutes until MGW 2400
finishes booting and loads the configuration. You cannot
log on to MGW 2400 before it does not finish loading the
configuration.
To add a configuration:
•
Click Add
description for the desired configuration and then click OK
; the configuration is saved and appears in the
Available Device Configurations list.
To delete a configuration:
•
Select the desired configuration from the list and click Del
; the selected configuration is removed from the
Available Device Configurations list.
When adding or activating a configuration, a window appears indicating that
the issued command is being processed. If this window does not close within
5 minutes, click Close and wait until the configuration has been added or
activated respectively.
, add the file name and a short
Note
Advertisement
Table of Contents
