Table of Contents
Advertisement
LEDs
Description
Power
Off
Blinks green
Green
Alarm
Off
On
Ethernet Link
Off
Orange
Ethernet Transmit
Off
Flashes green
(Channel) 1-6
Off
Blinks red
(if module inserted)
Green
Blinks green
Red
Table 8: MGW 2400 Front Panel LEDs
To avoid damaging MGW 2400's hardware, turn MGW 2400 off immediately
once the Alarm LED turns red.
Chapter 2 • Getting Started
No power
Booting
Power on
No error
At least one fan is running too
slowly or failed.
No connection
Connected
No transmission
Transmitting
Empty slot
MGW 2400 is booting.
Slot error (software not loaded)
Encoding module inserted and
ready to encode.
Encoding
Encoding module inserted,
channel error.
Certain errors may cause this
LED to flash.
Note
13
Advertisement
Table of Contents
