Table of Contents
Advertisement
Chapter 2 • Initial Configuration
40
5.
To synchronize MGW 2400 to the network time, press 2
(To Synchronize Time and Date with Server), type the
time server's hostname upon instruction to do so and press
Enter; MGW 2400 synchronizes to the network time.
6.
Press any key to return to the Set Time and Date menu.
7.
To return to the Utility menu, press 0 (Utility Menu); the
Utility menu appears.
8.
To return to the Main menu, press 0 (Main Menu); the
Main menu appears.
9.
To log off, press 0 (Quit); the Logon prompt appears.
10. To log on again, type the username and password for
Administrator; the Main menu appears.
11. If you don't want to log on again, terminate the connection.
Advertisement
Table of Contents
