Getting Started - Sencor SWS 105 User Manual

To turn on the weather station, proceed according to these instructions:
• Push down the button on the device using a paper clip or a thin item until
an audible click is heard.
• When the Power button clicks in, the device will be fully functional.
To turn off the weather station, proceed in the same manner.
The Power button will then release to the default position.
• Insert 2 pcs AAA batteries for remote sensor.
• The main unit will automatically scan for the radio-controlled clock signal
and the Meteotime Weather signal.
• The time and date signal will be received in a few minutes. Since there
is a large amount of Weather information for all regions and days, the
unit needs about 24 hours from the time of the initial setup to complete
the reception of all data
• After the time and date signal is being received successfully, it shows
"SELECT COUNTY" and then "FRANKFURT" as default city in the
information window.
To change the Country and the City please see the information below.
• If the unit is able to receive the Meteotime signal successfully,
the Meteotime icon
Otherwise, the Meteotime will be

GETTING STARTED

is appeared in the second row of display.
EN – 7
.