This unique product is designed for everyday use for the home or offi ce and is a defi nite asset of great use. To fully benefi t from all the features and understand the correct operation of this product, please read this instruction manual thoroughly.
H. Remote sensor indicator It is to indicate which channel of remote sensor is being used. It can display up to 3 different remote sensors which are in different locations and within 65 meters (210 feet) distance away from the main unit. Auto scroll indicator The arrow icon is shown to indicate the auto scroll of 3 different remote channels.
5. [ CH ] Select among channel 1, 2, 3 or to enter auto scroll mode. Press and hold for 2 seconds to activate or deactivate the sensor searching mode. In RF register mode ( reception of the DCF signal for clock control), press and hold for 2s to exit this register mode.
Page 5
BATTERY INSTALLATION FOR REMOTE SENSOR UNIT 1. Remove the battery cover by grabbing its bottom edge (near the two recess location) from bottom of sensor unit. 2. Insert 2 pieces of AA size batteries according to the “+” and “-” polarity marks shown in the battery compartment and then close the battery door with the clip on.
Page 6
1. To retrieve manually the specifi c sensor temperature and humidity reading, press CH key until desired channel number is displayed 2. To enable auto-scroll function, use CH button to toggle channel 1, 2 or 3 until auto scroll icon appears on the left hand side of the second line display.
Page 7
7. The year digit will fl ash and Yr icon appears. Press [ ] or [ ] button to set your desired year. Press [MODE] button to confi rm. Note: Year range is from 2000 to 2099. 8. D and M icons will fl ash. Press [ ] or [ ] to select D M (Date Month) or M D (Month Date) format.
3. The minute digits will fl ash. Use [ ] button to decrease by one minute or [ ] to increase by one minute to your desired minute. Hold press either button will change the digit rapidly. Press [MODE] button to confi...
SPECIFICATIONS Main Unit Displayed IN temperature range : -10°C to +60.0°C Proposed operating range : 0°C to +50.0°C Temperature resolution : 0.1°C Remote Temperature measurement Displayed OUT temperature range : -20.0°C to +60.0°C Temperature resolution : 0.1°C Indoor/Remote relative humidity measurement Displayed Relative Humidty range : 20%RH to 99%RH Measured temperature range...
Page 10
Fast ČR, a.s. declares that the SWS 165 conforms to the basic requirements and other relevant provisions of the directive 1999/5/ES. The device can be operated in the EU without restriction.
Page 11
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor.eu for detailed information about authorized service centers. EN - 10...
Need help?
Do you have a question about the SWS 165 and is the answer not in the manual?
Questions and answers