Sencor SWS 105 User Manual page 13

• Then, you are able to press [▲] or [▼] key to select more cities, and
then press [TEST √] to remove your selected cities. OR
• Press[SET] key to quit, and EXIT will shown at the information window.
After 4 seconds, it will go to the City –Date-Time Mode.
PERSONALIZED A PLACE NAME
• Press and hold [SET] for 3 seconds, In the information window,
For example, let's said you had selected country Germany which is
represen ted in
• Press [SET] key to confi rm the Country. (let's said we selectGermany
right now), then the information window will show
• Then, press [▲] or [▼] key to select the city, and the city name will be
shown in the information window such as
city 'Frankfurt am Main', and you would to enter a new city which is near
the region of Frankfurt am Main
• Press the [MEM] key ; a cursor fl ashes on the fi rst position of the
Information Window
Then following input commands then apply:
KEY Function
'▲' or '▼' Selection of a letter
SET <1> Accept the selected letter and jumps to the next position.
OR
<2> If you have not entered any letter (in other words, if only
the cursor is fl ashing at the last position), confi rm the entry with
this key and your place will also be included in the memory with
immediate effect
TEST One position back in the data entry process
** The place that you have selected to enter your own description will still
exist under its own name.
Press [SET] key to confi rm and exit
is shown, and then press [▲] or [▼] to select the country.
EN – 11
.
means