Set The Time, Date & Units - ACU-RITE 06024 Instruction Manual

Set the Time, Date & Units
Press and release the "SET" button, located on the front of the display, to enter
SET MODE. Once in set mode, the preference you are currently setting will
blink on the display.
To adjust the currently selected (flashing) item, press and release the "▲"
or "▼" buttons (press and HOLD to fast adjust). To save your adjustments,
press and release the "SET" button again to adjust the next preference. The
preference set order is as follows:
TIME ZONE (EST, AST, NST, HAT, AKT, PST, MST, CST)
AUTO DST* (Daylight Saving Time ON or OFF)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE SCALE (°F or °C)
BAROMETRIC PRESSURE SCALE (inHg or hPa)
*If you live in an area that observes Daylight Saving Time, DST should be set
to ON, even if it is not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
Enter SET MODE at any time by pressing the "SET" button.
Expand the System
The display features built-in sensors for measuring temperature and humidity
at its location. The display can be expanded to track additional conditions by
using compatible Monitors and Sensors (optional; sold separately). Add up
to 3 indoor and/or outdoor Monitors and Sensors to observe conditions in
additional locations within 330 ft (100 m).
Compatible Monitors and Sensors are available at: www.AcuRite.com
Compatible Monitors Perfect for:
• Outdoor applications
Temperature & Humidity Monitor
Model 00275
• Indoor applications
Room Monitor
Model 00276
7