Page 1
Step-by-Step Instructions for Changing Count Direction...
Page 2
VUE: Changing Count Direction Start with the unit off. Or turn it off and wait 10 seconds before you turn it back on.
Page 3
VUE: Changing Count Direction From the home screen, press the “ENTEkey.
Page 4
VUE: Changing Count Direction To change the count direction you don’t need to reference the scale, so press the “NO REF” soft key.
Page 5
VUE: Changing Count Direction When the axis is moved in the positive direction, the DRO shows a negative number. Here’s how to change it.
Page 6
VUE: Changing Count Direction Soft Menu Press the left arrow soft key until the first soft key menu space reads “SETUP.”...
Page 7
VUE: Changing Count Direction Press the “SETUP” soft key.
Page 8
VUE: Changing Count Direction Press the “INSTALL SETUP” soft key.
Page 9
VUE: Changing Count Direction The DRO asks you for a “PASSCODE.” Use the number soft keys and press:...
Page 10
VUE: Changing Count Direction “ENTER.” Press...
Page 11
VUE: Changing Count Direction “ENCODER SETUP” should be highlighted. If it isn’t, use “ENTER.” do wn arrow soft keys to highlight it. Then press...
Page 12
VUE: Changing Count Direction Use the orwn soft keys to highlight the input axis you want to change. Then press...
Page 13
VUE: Changing Count Direction This icon shows you how many pages there are in this function and which page you are on. Use the soft keys to highlight the “COUNT DIRECTION” box (shown on next page).
Page 14
VUE: Changing Count Direction Press the “POSITIVE / NEGATIVE” soft key once to change the count direction, then press ENTEto save your changes.
Page 15
VUE: Changing Count Direction Press the soft key as many times as needed to get back to the home screen.
Page 16
VUE: Changing Count Direction Your DRO should now display the correct count direction for your scale.