Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LED screen prior to using this product.
Features & Benefits Front of Display Antenna Keep in the vertical position for best signal strength. Previous Two Wind Directions Date & Day of the Week Clock 12 to 24 Hour Weather Forecast Self-Calibrating Forecast pulls data from your AcuRite Atlas Sensor to generate your personal forecast.
Page 4
Features & Benefits Back of Display Integrated Hangers For easy wall mounting. Plug-in for Power Adapter Display Stand Battery Compartment Cover Backup Battery Compartment...
SETUP witch 2. Insert 3 x AAA batteries into the Display Setup battery compartment, as C switch inside the shown. Follow the polarity tment. Set the A-B-C (+/-) diagram in the battery or C. You must select Install or Replace Backup Batteries (optional) compartment.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display and the sensor are critical to the accuracy and performance of this unit. Display Placement Place the display in a dry area free of dirt and dust. Display stands upright for tabletop use and is wall-mountable.
OPERATION Using the Weather Station Navigate to the main menu at any time by using the menu navigation buttons below the display. From the main menu, you can set alarms, modify display settings, review your connection with the sensor, and more. 1.
Page 8
5. Calibration Access the “Calibration” sub-menu to adjust display or sensor data. Select the category for which you wish to calibrate readings and follow the on-screen prompts to adjust the value. 6. Factory Reset Access the “Factory Reset” sub-menu to revert the display back to factory defaults. Follow the on-screen prompts to perform the reset.
Troubleshooting Problem Possible Solution • Relocate the display and/or the AcuRite Atlas sensor. ® The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 ft (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
Problem Possible Solution • Make sure both the display and AcuRite Atlas sensor are ® placed away from any heat sources or vents (see page 6). • Make sure both units are positioned away from moisture Inaccurate temperature or sources (see page 6). humidity •...
Customer Support AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways: Chat with our support team at www.acurite.com support Email us at support@chaney-inst.com ►...
Need help?
Do you have a question about the Atlas 06104 and is the answer not in the manual?
Questions and answers