Calibration - ACU-RITE 06024 Instruction Manual

Care & Maintenance
Display Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away
from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Calibration

Calibrate Temperature and Humidity
The temperature and humidity readings can be calibrated on the display to
improve accuracy. Calibration can improve accuracy when product placement or
environmental factors impact your data accuracy.
1. Press AND HOLD both the "SET" button and color-coded button (found next
to the location reading you wish to calibrate) simultaneously for 10 seconds.
2. Once in calibration mode, the reading you are currently calibrating will show
on the display.
3. Press the "▲" or "▼" buttons to calibrate the data value higher or lower from
the actual reading. The arrow in the forecast area indicates whether your
current calibrated value is higher, lower or the same as the actual reading.
4. Press the "SET" button to confirm the calibration adjustment. The "
will remain illuminated next to calibrated values.
5. The next adjustable data will be displayed, indicating it is ready to be
calibrated. Repeat Steps 2 - 4 to calibrate additional data.
6. After returning to normal viewing mode, repeat steps 1 - 5 to calibrate
readings for additional locations.
Note: Calibrations will be erased if the display is reset or if batteries are
removed and the power adapter is unplugged.
Calibrate Barometric Pressure
The default pressure mode is set to "auto." In auto mode, the pressure will
calibrate itself over a 14 day Learning Mode. Barometric pressure can be
manually calibrated:
1. Press AND HOLD the "SET" button for at least 10 seconds to enter manual
pressure mode.
2. The "manual" indicator will be shown above the un-calibrated pressure
reading. Press AND HOLD both the "SET" button and color-coded button
(found next to the location name of the display) for 10 seconds.
3. Press the "▲" or "▼" buttons to calibrate the data value higher or lower
from the actual reading. The arrow located next to the pressure reading
indicates whether your current calibrated value is higher, lower or the same
as the actual reading.
4. Press the "SET" button to confirm the calibration adjustment. The "
will remain illuminated next to the calibrated value.
Note: Calibration will be erased if the display is reset or if batteries are
removed and the power adapter is unplugged.
To exit manual pressure mode and return to auto mode press and hold the
"SET" button for at least 10 seconds.
16
" icon
" icon