Set The Time, Date & Units; Backlight Settings - ACU-RITE 06087 Instruction Manual

Set the Time, Date & Units
Press the " " button, located on the front of the display, to enter SET MODE. Once in
set mode, the preference you are currently setting will blink on the display.
To adjust the currently selected (flashing) item, press and release the "
V
" " buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "OK" button to adjust the next
preference. The preference set order is as follows:
AUTO DST (YES or NO)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
WIND SPEED UNITS (mph, km/h, knots)
PRESSURE UNITS (inHg or hPa)
You will automatically exit SET MODE if no buttons are pressed for 8 seconds. Enter SET
MODE at any time by pressing and holding the " " button.
*If you live in an area that observes Daylight Saving Time, DST should be set
to YES, even if it is not currently Daylight Saving Time.
Display Backlight Settings
This weather station's color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (15%) brightness.
When display is powered with the power adapter, backlight remains on at
100% brightness. Press the "
again to dim to 15%, press a third time to enter AUTO-DIM mode. "
appear next to the clock.
NOTE: Pressing and holding the "
Once any button is pressed, the backlight will return to your selected
setting.
AUTO DIM MODE:
" button once to dim to 60% brightness; press
" button for 5 seconds will disable the backlight.
Automatically adjusts display brightness based on time of day.
6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 15% brightness
8
" or
" will