FunctOn DSplay - Icom IC-M71 Instruction Manual

y TRANSMIT POWER/LOCK KEY [H/L•LOCK]
• Selects hgh, mddle or low power when pushed.
• Toggles the lock functon ON/OFF when pushed and
held for 1 sec.
(p. 10)
u SCAN KEY [SCAN•DUAL]
• Starts and stops normal or prorty scan when pushed.
(pgs. 14, 15)
• Enters watch mode when pushed and held for 1 sec.
i DIAL KEY [DIAL]
• Selects the regular channels when pushed.
• Selects the U.S.A.* , Internatonal, Canadan*
1
channel group when pushed and held for 1 sec.
- The functon dsplay shows whch channel group s actve.
*
1 U.K. and Chna versons only.
*
2 Chna verson only.
*
3 German and Holland versons only.
• Push to return to the condton before selectng the channel
when the prorty channel or the call channel s selected.
o SPEAKER-MICROPHONE CONNECTOR [SP MIC]
Connects the optonal external speaker-mcrophone or
headset.
NOTE: Attach the [SP MIC] cap when the optonal
speaker-mcrophone or headset s not used.
!0 ANTENNA CONNECTOR
Connects the suppled antenna.
n Function display
!5
(p. 9)
!4
!3
!2
!1
(p. 16)
!0
o
(p. 8)
or ATIS*
2 3
q CHANNEL NUMBER READOUT
(p. 8)
• Indcates the selected operatng channel number.
• In the SET mode, ndcates the selected condton.
• "DUP" appears when a duplex channel s selected.
w TAG CHANNEL INDICATOR (p. 15)
Appears when TAG channel s selected.
e BATTERY INDICATOR
Indcates remanng battery power.
Indication
Battery level
blinks when the battery is overcharged
PANEL DESCRIPTION
q
Charging
Full Middle
required
(or over voltage)
3
3
w
e
r
t
y
u
i
No battery
.
5