Logging In On Android And Configuring The Network - Vimtag VT 361 Manual

In the list of your available cameras, a green dot in the left corner indicates
that they are online. If the dot is red, it indicates they are offline. To
troubleshoot an offline camera, see
To enter a full screen view of the camera, tap the video.

Logging In On Android and Configuring the Network

Once you have installed the Android app, tap the app icon to open it. You
can enter your information in one of two ways, just as on an iOS device.
Note: The default password for all of the cameras is admin.
To add the camera, you will tap the menu icon in the upper left corner and
type it into the system manually. After inputting the ID correctly, you may
be prompted to change your password.
To modify your password, you can set up the Wi-Fi. Select the Wi-Fi access
point and enter the password for your network. This will add the camera
to the list. You can repeat these steps if you have several cameras. If you
need to delete a camera, you can simply do a long press on the camera in
question, and then select delete from the menu that pops up.
Once you have one or more cameras set up, you will be able to see the feed
through your phone. You will know if the camera is working properly
VIMTAG IP VT 361 SECURITY CAMERA
Installing and Configuring the Camera.
Page
6