Network - Vimtag VT 361 Manual

VIMTAG IP VT 361 SECURITY CAMERA

Network

The Network Tab will allow you to choose the network interface that you
want to use - Ethernet or Wi-Fi. When you choose Ethernet, you can enable
and disable the camera on the network. You can also view the MAC
address, the network status, and the IP information.
When you choose Wi-Fi, you can view the MAC address, mode, network
status, DNS, and IP information. You will also be able to choose Wi-Fi access
points from the drop-down list. If you do not see your network, refresh the
list. On this list, you will be able to view the strength of the Wi-Fi signal.
Multiple bars indicate a stronger connection.
If you have a hidden Wi-Fi, you need to make sure that the network is
visible during the setup to ensure that you can find your network. After
setting it up, you can hide your connection again. Enter the Wi-Fi password
information to connect.
Page
26