Installing The Camera On Walls And Ceilings - Vimtag VT 361 Manual

location that you need to keep secure. The "perfect placement" is likely
going to be different for each camera, as the layout of rooms and buildings
vary widely.
The best way to optimize the placement of the camera is simply by "trial
and error". Try placing the camera in several different spots, checking how
well each place works by viewing the live feed from the www.vimtag.com
site. As needed, move and adjust the camera until you can get the best
possible angle and location for your site.
When you are connecting through an Ethernet port, run the link cable from
the camera to your router so you can connect it to your network.
Connecting by Wi-Fi tends to give more options in terms of placement,
since you do not have to worry about the proximity to the router.
In many cases, you will be able to place the camera on a desk, a bookshelf,
or other horizontal surface. Or, you may need to mount it on a wall or other
location to get that perfect angle.

Installing the Camera on Walls and Ceilings

Before installing the VT-361, you must first identify a suitable location on a
wall or ceiling. Once you have decided on a location, it is important to check
the quality and angle of the image before actually mounting the camera.
Once you have verified that you have optimized the camera location, affix
the mounting bracket tray to the wall using a screwdriver and the
appropriate screw. You can then place the camera on the mounting bracket
tray and secure it by tightening the screws by hand.
If you place the camera upside down, the viewed image will be upside
down when you view it through the monitoring site. To reverse the image
so it appears right side up, use the Flip function on the www.vimtag.com
site. See Settings and
VIMTAG IP VT 361 SECURITY CAMERA
Options.
Page
13