System; Online Upgrade; Restore To Factory Settings; Restart Device - Vimtag VT 361 Manual

System

Under System, there are three sections. The first is Online Upgrade which
is a very important one that you should check on a monthly basis. If there
is an update available, it will let you know. You can then click for the
upgrade. This will provide updates for the camera.

Online upgrade

Online upgrade displays the current version number and shows if there is
a newer version. To download and install the latest software version, click
Update.
Ideally, this field should display "No update available," indicating that your
Vimtag camera is using the latest upgrade available. It is recommended
that you check the Online upgrade option at least once per month.

Restore to factory settings

If you click Restore, it will restore the camera to the factory defaults, which
can be helpful in case you have made changes to the camera and want to
cancel these changes.
Note: When choosing Restore to Factory Settings, you also have the
choice to keep or remove the network settings. If you do not keep the
network settings, then you will have to reenter the network information
to get the camera working on your network again. It is recommended
that you keep the network settings, and just restore the other parts of
the camera back to factory settings.

Restart device

Clicking Restart reboots the camera. It is the same as unplugging the
camera and plugging it back in again but is accomplished remotely.
Note: When the camera goes offline, such as when using the Restart
button, the snapshots are deleted if you do not have an SD card.
If you have an SD card, the information is safe. Many use the Restart button
as a way to clear the images from their camera quickly.
VIMTAG IP VT 361 SECURITY CAMERA
Page
34