To Change The Name Of A Camera; To Determine Whether A Camera Is Live Or Not, Check The Camera Status - Vimtag VT 361 Manual

countries. Multiple cameras also work well for large sites, such as big
homes and public institutions, which require optimal security.
Vimtag makes it easy for you to view and control all cameras from the same
account. You are able to switch between them by selecting the camera
name and making sure that the camera is live. For this reason, it is a good
idea to provide the cameras with names that help identify its location or
cause.

To change the name of a camera:

The name you use for the camera should assist you in identifying either its
location, its purpose, or some other useful and unique information. You can
set or change the name of the camera by accessing the Settings window,
as follows:
1. In the Vimtag Web App, select the relevant device. When the device
results are loaded, click the Settings icon found in the upper right
corner.
2. In the Settings options, click Name. The current name of the camera
appears.
3. Change the name and then click Apply to save it.
4. On a computer, open the Vimtag website (www.vimtag.com) in your
browser. Log in, and then select the relevant device.
5. When the device results are loaded, click the Settings icon found in
the lower right corner.
6. In the Settings options, click Nickname. The current name of the
camera appears.
7. Change the Name, and then click Apply.

To determine whether a camera is live or not, check the camera status:

If there is a green circle to the left of the camera name, the camera is
•
online and ready.
• If there is a yellow circle to the left of the camera name, the camera is
on, but the password has been changed, or the camera software needs
to be upgraded. To access this camera again, you will need to enter
the new password.
VIMTAG IP VT 361 SECURITY CAMERA
Page
20