Physical Features Of The Camera - Vimtag VT 361 Manual

Physical Features of the Camera

It is helpful to become familiar with the various elements and physical
features of your new camera. The following sections detail the physical
aspects of the camera.
The Top
On the front of the camera, at the top, is the photosensitive sensor, which
surrounds the lens. Just below the lens is the infrared light (IRL) which
allows you to video in the dark.
Right below the IRL is the microphone, which will pick up sound from inside
the room in which the camera is located.
Located on the side of the camera toward the top is the loudspeaker, which
will capture the voice of someone speaking nearby.
Next is the Ethernet interface, followed by the external input/output
interface. After the input/output interface is the SD slot for your SD card
(32GB recommended), and the audio input/output interface. The back also
features the FN composite button, and the Wi-Fi antenna.
VIMTAG IP VT 361 SECURITY CAMERA
The Bottom
At the center of the bottom, you will find
the Power LED. When this is lit up, the
camera is on. To the left of this LED is
wireless Network Status Light, and to the
right is wired Network Status Light.
The Back
On the back of the camera, starting at the
left, you will see the DC5V Power Port,
which you will use to connect to a power
source.
Page
11