Schedule Alerting; Schedule Recording - Vimtag VT 361 Manual

On the Android and iPhone app, whenever there is a motion alert, it will
send you an alarm and a photo of what is happening. You will not get an
alarm when you are on PC only, but the camera will take the snapshots and
recordings and will send them to your Records and Playback for video
pages.

Schedule Alerting

The Schedule Alerting tab enables you to specify the days and times of the
week when you want to receive alerts. An alert would be triggered based
on detected motion. At times when you do not expect there to be
movement around your home or office, you may wish to schedule an alert.
For example, a store might set up a camera just inside the entrance. It is
likely that the store would expect customers to be entering and exiting
during the day but once the store closed in the evening and the owners
left, there should be no movement. By enabling the Schedule Alerting
feature, an alert would be triggered during the "off" hours only.
For each schedule, you can set a beginning time and an ending time, and
specify the days of the week, the app should generate an alert if motion is
detected. Once you have configured all of your schedules, click Apply.

Schedule Recording

Under the Schedule Recording tab, you have the ability to enable
recordings based on two different options: 24/7 and Scheduled. The
enabled button should be ON.
• 24/7 - You will be recording around the clock.
A Scheduled Recording gives you control over the times that you
•
actually record by scheduling a specific times. You will be able to
schedule up to four different recording sessions.
To set up the first scheduled recording, click Schedule 1. Select the days of
the week that you want to record. You can also select all days. Also select
the beginning and ending times. The system uses a 24-hour clock. If you
want to record from midnight to 5AM, for example, you would enter 00:00
VIMTAG IP VT 361 SECURITY CAMERA
Page
32