Name; Device Admin Password; Device Guest Password - Vimtag VT 361 Manual

Plug-in Version - The version of the plug-in you are using.
•
Device ID - The identifying number for your device.
•

Name

The Name option enables you to quickly identify a camera. Type the name
in the box and then click Apply. The camera is now listed by its name. For
example, you may have one camera named Office and one named
Entrance. If you do not create a name, the default name is used.

Device Admin Password

To change the admin password, type in your old password in the top box,
then type in the new password below. Confirm your new password by
typing it again, and then click Apply. You can change the password as many
times as needed.
Each camera can have an Admin password. You can choose to give a person
admin permissions on a single camera, but not all of the other cameras in
your system, when you change the password through this setting.

Device Guest Password

Under the Guest Password tab, you can create a password when you want
to allow guests to use a camera.
First, you need to enter your Admin password, then create the guest
password and confirm it. Click Apply, and your guest password is created.
The guest password added in this section will only work for the selected
camera. As previously described, guests will have limited abilities and
permissions.
VIMTAG IP VT 361 SECURITY CAMERA
Page
25