Connecting A Portable Dvd Player Or Video Camcorder; Connecting A Cd Player, Turntable Or Tuner - Onkyo TX-NR1000 Instruction Manual

Connecting AV Components —Continued

Connecting a Portable DVD Player or Video Camcorder

• When connecting a portable DVD player or video
camcorder to the TX-NR1000/TX-NR5000E, use the
VIDEO 7 INPUT terminals on the front panel.
• You can change the display name for the input source
to represent the actual connected device (See page
97).

Connecting a CD Player, Turntable or Tuner

• When connecting a CD player to the TX-NR1000/TX-NR5000E, make connections using digital or analog termi-
nals. Before making connections, refer to page 30 for correct connections. This section shows the connection exam-
ple when you use the default audio input assignment settings. However, when you use coaxial cables for digital
audio signals, connect the CD player to any terminal between the AUDIO IN DIGITAL COAXIAL 1 and 6, and
remember to configure the audio input assignment settings in the Audio Assign sub-menu (See page 94).
• When connecting a turntable, use the PH terminal. The PH terminal on the TX-NR1000/TX-NR5000E is designed
for turntables that use a moving magnet (MM) cartridge. When you want to use a turntable with a moving coil (MC)
cartridge, connect the turntable through a step-up transformer or head amplifier.
• If you assign other terminals to the PHONO input source, you need to configure the audio input assignment settings
in the Audio Assign sub-menu (See page 94).
• When a turntable is equipped with a ground wire, connect the wire to the GND terminal on the TX-NR1000/
TX-NR5000E. However, some turntables may produce noise when the ground wire is connected to the TX-NR1000/
TX-NR5000E. In such a case, you do not have to connect the ground wire.
• When you want to perform analog recording of the audio signal or operate your
connections between the TX-NR1000/TX-NR5000E, you have to make analog audio signal connections. Con-
nect the audio output terminals on the source device to the AUDIO IN terminals on the TX-NR1000/TX-NR5000E
using analog audio cables (RCA/phono).
CD Player
When connecting to other audio terminals within the
same terminal section, configure the audio input set-
tings accordingly using the Audio Assign sub-menu
(See page 94).
38
VIDEO 7 INPUT
OPTICAL S VIDEO
VIDEO L----AUDIO----R
AUDIO OUT
DIGITAL
OPTICAL
C DIGITAL IN D DIGITAL IN
OPTICAL COAXIAL
1 1
2 2
"Net-Tune"
3 3
is a trademark of
Onkyo Corporation.
4 4
Game, Portable DVD,
Video Camcorder
AUDIO OUT AUDIO OUT
DIGITAL
ANALOG
OPTICAL
R L
-compatible Onkyo products via
AUDIO OUT
ANALOG
R L
E MULTI F AUDIO IN G G H S VIDEO VIDEO
- CH
R L R L
IN 1
FR
FL
PH 4 1
SUB C
5 2
GND
R L
SR SL
1 6 3
SBR SBL
2 7
4
FR FL
VIDEO S VIDEO
OUT OUT
Turntable
GND GND
COMPONENT K
I J L
VIDEO
IN 1
IN 2
COMPONENT VIDEO ANTENNA
IN 4
Y
Y
P
B
P
B
HD
P
R is
FM or
75
tra
OUT 1 IN 3
Lic
P R
Y
OUT 2