1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Receiver
  5. TX-NR1007B
  6. Instruction manual

Onkyo TX-NR1007B Instruction Manual

User manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AV Receiver
TX-NR1007
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction ...................................2
Connection ..................................18
Turning On & First Time Setup .....43
Basic Operations.........................62
Using the Listening Modes ........76
Advanced Setup ..........................87
NET
............................................115
Multi Zone
................................123
Controlling Other Components....132
Others.........................................147
E
n

Advertisement

Table of Contents
loading

Related Manuals for Onkyo TX-NR1007B

Summary of Contents for Onkyo TX-NR1007B

  • Page 1 Using the Listening Modes ..76 Advanced Setup ......87 ..........115 Multi Zone ........123 Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable Controlling Other Components..132 you to obtain optimum performance and listening enjoyment from your new AV Receiver.

  • Page 2: Important Safety Instructions

    WARNING: WARNING AVIS RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE.

  • Page 3: Precautions

    CET APPAREIL NUMÉRIQUE DE are wet or damp. If water or any other liquid gets LA CLASSE B EST CONFORME À LA NORME inside this unit, have it checked by your Onkyo NMB-003 DU CANADA. dealer. Sur les modèles dont la fiche est polarisée: 8.

  • Page 4: Supplied Accessories

    ELECTRONICS GmbH LIEGNITZERSTRASSE 6, Speaker cable labels 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. Power-plug adapter GROEBENZELL, GERMANY Only supplied in certain countries.

  • Page 5: Table Of Contents

    Looking up for Remote Control Code ..... 132 Using the Display to change the settings ....46 Entering Remote Control Codes......134 Monitor Out Setup ............ 47 Remote Control Codes for Onkyo Components Video Input Setup ............. 49 Connected via ..........135 Digital Audio Input Setup ..........

  • Page 6: Features

    Performance for Cleaner Sound trademarks of Dolby Laboratories. • Three TI (Aureus) 32-bit Processing DSP *4. Music Optimizer™ is a trademark of Onkyo Corporation. • Neural Surround Decoding • DSD Direct HDMI, the HDMI logo and High Definition Multimedia Inter- face are trademarks or registered trademarks of HDMI Licens- ing, LLC.
  • Page 7 HD Radio™ and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation. authorized by Macrovision Corporation, and is intended for To receive HD Radio broadcasts, you must install an Onkyo home and other limited consumer uses only unless otherwise UP-HT1 HD Radio tuner module (sold separately).

  • Page 8: Front & Rear Panels

    Front & Rear Panels Front Panel Front flap Pull here to open the flap The actual front panel has various logos printed on it. They are not shown here for clarity. The page numbers in parentheses show where you can find the main explanation for each item. ON/STANDBY button (43) MASTER VOLUME control (62) and indicator This button is used to set the AV receiver to On or...
  • Page 9 Front & Rear Panels—Continued (North American models) (European and Asian models) The page numbers in parentheses show where you can find the main explanation for each item. PHONES jack (65) DIMMER button (64) This 1/4-inch phone jack is for connecting a stan- (North American models) dard pair of stereo headphones for private listening.

  • Page 10: Display

    Front & Rear Panels—Continued SETUP MIC jack (57) Up [ ] and Down [ ] buttons (63, 130) ® Audyssey MultEQ XT Room Correction and Used to adjust the tone (bass and treble) for the Speaker Setup microphone connects here. main room and the volume, tone and balance for Zone 2 or Zone 3.

  • Page 11: Rear Panel

    Front & Rear Panels—Continued Tuning indicators Bi AMP indicator (21) Lights when the “Speakers Type(Front)” setting is RDS (European models) (70): set to “Bi-Amp”. Lights when tuned to a radio station that supports RDS (Radio Data System). Headphone indicator (65) Lights when a pair of headphones are plugged into AUTO (68): the PHONES jack.
  • Page 12 This (Remote Interactive) jack can be con- These analog audio inputs are for connecting a turn- nected to an jack on another Onkyo AV compo- table. nent. The AV receiver’s remote controller can then CD IN be used to control that component. To use...
  • Page 13 Front & Rear Panels—Continued MULTI CH input: FRONT L/R, CENTER, SUBWOOFER, SURR L/R, and SURR BACK This analog multichannel input is for connecting a component with a 5.1/7.1-channel analog audio out- put, such as a DVD player, DVD-Audio or Super Audio CD-capable player, or an MPEG decoder.

  • Page 14: Remote Controller

    • When the remote control codes have been registered and you want to operate another component (page 134), or when you want to operate an Onkyo component without connection, point the remote controller at the other component to use it.

  • Page 15: Controlling The Av Receiver

    Remote Controller—Continued Controlling the AV Receiver For detailed information, see the pages in parentheses. To control the AV receiver, press the [RECEIVER] STANDBY button (43) button to select Receiver mode. Sets the AV receiver to Standby. You can also use the remote controller to control your ON button (43) DVD/BD player, CD player, and other components.
  • Page 16 Used to select radio presets. Number buttons (68, 69) Used to select radio stations directly in the Direct tuning mode. Also you can select a preset directly. Note: An Onkyo cassette recorder connected via can also be controlled in Receiver mode (see page 142).

  • Page 17: About Home Theater

    With DVDs you can enjoy DTS and Dolby Digital. With analog or digital TV, you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onkyo’s original DSP listening modes.

  • Page 18: Connecting The Av Receiver

    Connecting the AV receiver Connecting Your Speakers Speaker Configuration For 9.2-channel surround-sound playback, you need nine speakers and two powered subwoofers. The following table indicates the channels you should use depending on the number of speakers that you have. Number of speakers: ✓...
  • Page 19 Connecting the AV receiver—Continued Using Dipole Speakers Speaker Connection Precautions You can use dipole speakers for the surround left and Read the following before connecting your speakers: right, surround back left and right speakers. Dipole • You can connect speakers with an impedance of speakers output the same sound in two directions.
  • Page 20 Connecting the AV receiver—Continued Connecting the Speaker Cables 1/2" to 5/8" Strip 1/2" to 5/8" (12 to Fully insert the bare (12 to 15 mm) 15 mm) of insulation wires. from the ends of the speaker cables, and twist the bare wires tightly, as shown.

  • Page 21: Bi-Amping The Front Speakers

    Connecting the AV receiver—Continued Bi-amping Speaker Hookup Bi-amping the Front Speakers The FRONT L/R and SURR BACK/ZONE 3 L/R termi- Connect the AV receiver’s FRONT R positive (+) nal posts can be used with front speakers and surround terminal to the right speaker’s positive (+) Woofer back speakers respectively, or bi-amped to provide sepa- (low) terminal.

  • Page 22: Connecting Antenna

    Connecting the AV receiver—Continued If you cannot achieve good reception with the supplied Connecting Antenna indoor FM antenna, try a commercially available out- This section explains how to connect the supplied indoor door FM antenna instead (see page 23). FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas.
  • Page 23 Connecting the AV receiver—Continued Connecting an Outdoor FM Antenna Connecting an Outdoor AM Antenna If you cannot achieve good reception with the supplied If good reception cannot be achieved using the supplied indoor FM antenna, try a commercially available out- AM loop antenna, an outdoor AM antenna can be used door FM antenna instead.

  • Page 24: About Av Connections

    Connecting the AV receiver—Continued AV Connection Color Coding About AV Connections RCA-type AV connections are usually color-coded: red, • Before making any AV connections, read the manuals white, and yellow. Use red plugs to connect right-chan- supplied with your other AV components. nel audio inputs and outputs (typically labeled “R”).

  • Page 25: Connecting Components With Hdmi

    ■ Onkyo for System Control , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard.

  • Page 26: Audio Signals

    Connecting the AV receiver—Continued Making HDMI Connections Step 1: Use HDMI cables to connect the AV receiver’s HDMI jacks to your HDMI-compatible DVD/BD player, TV, projec- tor, and so on. Step 2: Assign each HDMI IN to an input selector in the HDMI Input Setup (see page 49). ■...

  • Page 27: Connecting Both Audio & Video

    Connecting the AV receiver—Continued Connecting Both Audio & Video By connecting both the audio and video outputs of your DVD/BD player and other AV components to the AV receiver, you can select both the audio and video simultaneously simply by selecting the appropriate input source on the AV receiver.
  • Page 28 Connecting the AV receiver—Continued ■ “Monitor Out” Setting Set to “Both”, “Both (Main)” or “Both (Sub)” DVD/BD player, etc. Video Signal Flow Chart With the “Monitor Out” setting set to “Both”, “Both (Main)” or “Both (Sub)” (see page 47), video input signals flow through the AV receiver as shown, with composite video, S-Video, and Composite S-Video...
  • Page 29 Connecting the AV receiver—Continued Audio Connection Formats DVD/BD player, etc. Audio equipment can be connected to the AV Audio Signal Flow Chart receiver by using any of the following audio con- nection formats: analog, optical, coaxial, analog multichannel, or HDMI. Analog Multichannel Optical...

  • Page 30: Connecting A Tv Or Projector

    Connecting the AV receiver—Continued Connecting a TV or Projector See “Connecting Components with HDMI” on page 25 for HDMI connection information. Step 1: Video Connection Choose a video connection that matches your TV ( , , or ), and then make the connection. Step 2: Audio Connection Choose an audio connection that matches your TV ( , , or...

  • Page 31: Connecting A Dvd Player

    Connecting the AV receiver—Continued Connecting a DVD Player See “Connecting Components with HDMI” on page 25 for HDMI connection information. Step 1: Video Connection Choose a video connection that matches your DVD player ( , , or , and then make the connection. You must connect the AV receiver to your TV via the same type of connection.
  • Page 32 Connecting the AV receiver—Continued Hooking Up the Multichannel Input If your DVD player supports multichannel audio formats such as DVD-Audio and Super Audio CD, and it has a multi- channel analog audio output, you can connect it to the AV receiver’s multichannel input. Use a multichannel analog audio cable, or several normal audio cables, to connect the AV receiver’s MULTI CH: FRONT L/R, CENTER, SURR L/R, SURR BACK L/R, and SUBWOOFER jacks to the 7.1-channel analog audio output on your DVD player.

  • Page 33: Connecting A Vcr Or Dvd Recorder For Playback

    Connecting the AV receiver—Continued Connecting a VCR or DVD Recorder for Playback With this hookup, you can use your VCR’s tuner to listen to your favorite TV programs via the AV Hint! receiver, useful if your TV has no audio outputs. Step 1: Video Connection Choose a video connection that matches your VCR or DVD recorder ( , , or...

  • Page 34: Connecting A Vcr Or Dvd Recorder For Recording

    Connecting the AV receiver—Continued Connecting a VCR or DVD Recorder for Recording Step 1: Video Connection Choose a video connection that matches your VCR or DVD recorder ( ), and then make the connection. The video source to be recorded must be connected to the AV receiver via the same type of connection. Step 2: Audio Connection Make the audio connection Connection...

  • Page 35: Connecting A Satellite, Cable, Terrestrial Set-Top Box, Or Other Video Source

    Connecting the AV receiver—Continued Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs Hint! via the AV receiver, useful if your TV has no audio outputs. Step 1: Video Connection Choose a video connection that matches the video source ( , , or...

  • Page 36: Connecting A Game Console

    Connecting the AV receiver—Continued Connecting a Game Console Step 1: Video Connection Choose a video connection that matches your game console ( , , or , and then make the connection. You must connect the AV receiver to your TV with the same type of connection. Step 2: Audio Connection Choose an audio connection that matches your game console ( ), and then make the connection.

  • Page 37: Connecting A Camcorder Or Other Device

    Connecting the AV receiver—Continued Connecting a Camcorder or Other Device Step 1: Video Connection Make the connection Step 2: Audio Connection Choose an audio connection that matches your camcorder ( ), and then make the connection. Connection AV receiver Signal flow Camcorder etc.

  • Page 38: Connecting A Cd Player Or Turntable

    Connecting the AV receiver—Continued Connecting a CD Player or Turntable ■ CD Player or Turntable (MM) with Built-in Phono Preamp Step 1: Choose a connection that matches your CD player ( , , or ). Use connection for a turntable with a built-in phono preamp.

  • Page 39: Connecting A Cassette, Cdr, Minidisc, Or Dat Recorder

    Connecting the AV receiver—Continued Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Step 1: Choose a connection that matches the recorder ( , ), and then make the connection. • With connection , you can play and record or listen in Zone 2 or Zone 3. •...

  • Page 40: Connecting A Power Amplifier

    Connecting the AV receiver—Continued Connecting a Power Amplifier If you want to use a more powerful power amplifier and use the AV receiver as a preamp, connect it to the PRE OUT jacks, and connect all speakers and the subwoofer to the power amplifier. You can connect the powered subwoofer with each jacks respectively.

  • Page 41: Connecting An Ri Dock

    Connect your RI Dock’s audio output jacks to the A2 hookup shown below.) AV receiver’s GAME IN or VCR/DVR IN L/R jacks, and connect its video output jack to the AV receiver’s GAME IN V or VCR/DVR IN V jack. (Onkyo DS- A2 hookup shown below.) TV/TAPE GAME...

  • Page 42: Connecting Onkyo Components

    To AC wall outlet malfunction. • Some components may not support all functions. Refer to the manuals supplied with your other Onkyo Step 2: components. Plug the power cord into an AC wall outlet. • While Zone 2 or Zone 3 is on, the Auto Power...

  • Page 43: Turning On The Av Receiver

    If you have, see “HDMI Input Setup” on page 49, “Component Video Input Setup” on page 50, or “Digital Audio Input Setup” on page 51 respectively. ■ Have you connected an Onkyo MD recorder, CD recorder, or RI Dock? If you have, see “Changing the Input Display” on page 55.

  • Page 44: First Time Setup

    First Time Setup This section explains the settings that you need to make before using the AV receiver for the very first time. ■ Change “Monitor Out” setting manually Monitor Setup If you connect your TV to HDMI OUT MAIN, “Monitor Out”...

  • Page 45: Selecting The Language Used For The Onscreen Setup Menus

    First Time Setup—Continued In this Instruction Manual, illustrations from the onscreen menu or explanations referring to the menu will be in the same language as the Instruction Manual. The default Language setting for the onscreen menu is English. If your Instruction Manual is in a language other than English, first follow the instructions below to change the Language.

  • Page 46: Using The Onscreen Setup Menus

    First Time Setup—Continued Using the Display to change the settings The settings of the AV receiver can be changed using the Display. Press the [RECEIVER] button fol- lowed by the [SETUP] button. RECEIVER The main menu item appears on the display.

  • Page 47: Monitor Out Setup

    First Time Setup—Continued Use the Up and Down [ ]/[ ] but- Monitor Out Setup tons to select “Monitor Out”, and If you connect your TV to the HDMI output, set the use the Left and Right [ ]/[ ] “Monitor Out”...
  • Page 48 First Time Setup—Continued • This procedure can also be performed on the AV Use the Up and Down [ ]/[ ] but- receiver by using its [SETUP] button, arrow buttons, tons to select “Resolution”, and and [ENTER] button. use the Left and Right [ ]/[ ] buttons to select: Through: Select this to pass video through the...

  • Page 49: Video Input Setup

    First Time Setup—Continued Use the Up and Down [ ]/[ ] but- Video Input Setup tons to select an input selector, and use the Left and Right [ ]/ HDMI Input Setup [ ] buttons to select: If you connect a video component to HDMI IN, you HDMI1, HDMI2, HDMI3, HDMI4, must assign that input to an input selector.
  • Page 50 First Time Setup—Continued Component Video Input Setup Use the Up and Down [ ]/[ ] but- tons to select “3. Component If you connect to a COMPONENT VIDEO IN, you must Video Input”, and then press assign it to an input selector. For example, if you connect [ENTER].

  • Page 51: Digital Audio Input Setup

    First Time Setup—Continued Digital Audio Input Setup Use the Up and Down [ ]/[ ] but- tons to select an input selector, If you connect a component to a digital input jack, you and use the Left and Right [ ]/ must assign that jack to an input selector.

  • Page 52: Analog Audio Input Setup

    First Time Setup—Continued Analog Audio Input Setup Press the [SETUP] button. The setup menu closes. If you connect a component to the AV receiver’s analog multichannel input, you must assign that input to an input selector. For example, if you connect your DVD/ BD player to the MULTI CH input, you must assign it to the DVD/BD input selector.

  • Page 53: Speaker Settings

    First Time Setup—Continued Use the Up and Down [ ]/[ ] but- Speaker Settings tons to select “Speaker Imped- ance”, and then use the Left and If you change these settings, you must run Right [ ]/[ ] buttons to select: ®...

  • Page 54: Tv Format Setup (European And Asian Models)

    First Time Setup—Continued TV Format Setup (European and When you’ve finished, press the Asian models) [SETUP] button. The setup menu closes. For the onscreen setup menus to display properly, you must specify the TV system used in your area. Press the [RECEIVER] button fol- Note: lowed by the [SETUP] button.

  • Page 55: Changing The Input Display

    GAME DOCK Changing the Input Display For the VCR/DVR input selector, the setting changes in this order: If you connect an -capable Onkyo MiniDisc ↔ VCR/DVR DOCK recorder, CD recorder, or RI Dock to the TV/TAPE IN/ (3 seconds) OUT jacks, or connect an RI Dock to the GAME IN or...

  • Page 56: Audyssey Multeq ® Xt Room Correction And Speaker Setup

    First Time Setup—Continued Measurement Positions ® Audyssey MultEQ XT Room To create a listening environment in your home theater Correction and Speaker Setup that all listeners will enjoy, Audyssey MultEQ XT takes With the supplied calibrated microphone, measurements at up to eight positions within the Audyssey MultEQ XT automatically determines the listening area.
  • Page 57 First Time Setup—Continued ® Using Audyssey MultEQ Turn on the AV receiver and the connected TV. On the TV, select the input to which the ON/STANDBY AV receiver is connected. Set the speaker setup micro- phone at the Main Listening Posi- tion (page 56), and connect it to the SETUP MIC jack.
  • Page 58 First Time Setup—Continued When prompted, place the setup • Make the room as quiet as possible. microphone at the next position, Background noise can disrupt the and repeat step 5. room measurements. Close windows, silence cell phones, After the 3rd to the 8th measure- televisions, radios, air conditioners, ment, the following screen fluorescent lights, home appliances,...

  • Page 59: Error Messages

    First Time Setup—Continued set to “Audyssey” and “Dynamic EQ” (page 97) will When the calculations are com- be set to “On”. plete, the following screen • You can cancel the Room Correction and Speaker appears. Setup at any point in this procedure simply by disconnecting the setup microphone.
  • Page 60 First Time Setup—Continued MultEQ XT: Auto Setup MultEQ XT: Auto Setup Speaker Detect Error Speaker Detect Error SR : SR : FWL : FWR : FWL : FWR : FHL : FHR : FHL : FHR : SBL : SBR : SBL : SBR : SW1 :...
  • Page 61 This message appears if saving fails. Try saving again. If this message appears after 2 or 3 attempts, the AV receiver is probably malfunctioning. Contact your Onkyo dealer. Retry: Return to step 2 and try again. Cancel: Cancel the room correction and speaker setup.

  • Page 62: Basic Operations

    Basic Operations Selecting the Input Source This section explains how to select the input source (i.e., the AV component that you want to listen to or watch). MASTER VOLUME INPUT SELECTOR RECEIVER VOL / Input selector buttons Use the AV receiver’s input selector buttons to select the input AV receiver Remote controller...

  • Page 63: Adjusting The Bass & Treble

    Basic Operations—Continued Notes: DISPLAY • This setting is not available when the multichannel Analog input is selected. • To bypass the bass and treble tone circuits, select the Direct, Pure Audio or THX listening mode. Displaying Source Information You can display various information about the current input source as follows.

  • Page 64: Setting The Display Brightness

    Basic Operations—Continued Setting the Display Brightness Using the Sleep Timer You can adjust the brightness of the AV receiver’s dis- With the sleep timer, you can set the AV receiver to turn play. off automatically after a specified period. Remote Press the [RECEIVER] button, Remote Press the [RECEIVER] button,...

  • Page 65: Selecting Speaker Layout

    Basic Operations—Continued Selecting Speaker Layout Using Headphones You can select the priority of the use of Front High You can connect a pair of stereo headphones (1/4-inch speakers or Front Wide speakers. phone plug) to the AV receiver’s PHONES jack for pri- vate listening, as shown.

  • Page 66: Using Easy Macros

    1. The Onkyo CD player connected Using the Easy macro command in the Easy macro to the AV receiver is turned on. mode, you can sequentially operate Onkyo components 2. The AV receiver is turned on. with simple commands by simply pressing one button.
  • Page 67 OFF] buttons and press the [ALL When you press the [MY MUSIC] but- OFF] button again. ton and want to start the Onkyo Cas- The [ALL OFF] button flashes twice. sette recorder, while holding down [TV/TAPE] button, press and hold...

  • Page 68: Listening To The Radio

    Listening to the Radio Using the Tuner TUNED AUTO With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite stations as presets for quick selection. FM STEREO TUNER ■ Manual Tuning Mode Press the [TUNING MODE] but- ton so that the AUTO indicator disappears from the display.

  • Page 69: Presetting Am/Fm Stations

    Listening to the Radio—Continued Presetting AM/FM Stations To select a preset, use the PRE- AV receiver SET [ ]/[ ] buttons, or the remote controller’s CH [+/–] but- MEMORY PRESET ton. Remote controller You can store a combination of up to 40 of your favorite AM/FM radio stations as presets.

  • Page 70: Using Rds (European Models)

    Listening to the Radio—Continued RDS Program Types (PTY) Using RDS (European models) RDS only works in areas where RDS broadcasts are Type Display available. None None When tuned into an RDS station, the RDS indicator News reports News appears. Current affairs Affairs RDS indicator Information...
  • Page 71 Listening to the Radio—Continued When tuned to an RDS station that’s broadcasting text information, the text can be displayed. Displaying Radio Text (RT) To start the search, press [ENTER]. The AV receiver searches until it finds a station of the type you specified, at which point it stops briefly before con- tinuing with the search.

  • Page 72: Universal Port Option Up-A1 Dock For Ipod

    • While your iPod is in the UP-A1 Dock, its volume For the latest information on the Dock, see the Onkyo control has no effect. If you adjust your iPod models Web site at: http://www.onkyo.com volume control while it’s in the UP-A1 Dock, make sure it’s not set too high before you reconnect your...

  • Page 73: Controlling Ipod

    Universal Port Option UP-A1 Dock for iPod—Continued Arrow [ ]/[ ] and ENTER buttons Controlling iPod Used to navigate menus and select items. By pressing the REMOTE MODE button that’s been Previous [ ] button programmed with the remote control code for your Restarts the current song.
  • Page 74 Universal Port Option UP-A1 Dock for iPod—Continued Status messages ❏ PORT Reading The AV receiver is checking the connection with the dock. ❏ PORT Not Support The AV receiver do not support the connected dock. ❏ PORT UP-A1 UP-A1 Dock is connected. Notes: •...

  • Page 75: Recording

    Recording This section explains how to record the selected input Recording Separate AV Sources source to a component with recording capability, and Here you can record audio and video from completely how to record audio and video from different sources. separate sources, allowing you to overdub audio onto Notes: your video recordings.

  • Page 76: Using The Listening Modes

    Using the Listening Modes Selecting with the Remote Controller Selecting Listening Modes See “About the Listening Modes” on page 84 for detailed information about the listening modes. • The Dolby Digital and DTS listening modes can only be selected if your DVD player is con- nected to the AV receiver with a digital audio MOVIE/TV connection (coaxial, optical, or HDMI).

  • Page 77: Listening Modes Available For Each Source Format

    Using the Listening Modes—Continued Listening Modes Available for Each Source Format The Speaker layout illustration : Front left speaker shows which speakers are set to : Front wide left speaker active in the “Speaker Configu- : Front high left speaker ration”...
  • Page 78 Using the Listening Modes—Continued Stereo Source (1/2) ✔: Available Listening Modes Speaker layout Listening Mode Button ✔ ✔ ✔ ✔ Pure Audio ✔ ✔ ✔ ✔ Direct ✔ ✔ ✔ ✔ Stereo ✔ ✔ ✔ ✔ Mono PLII/PLIIx ✔ ✔ ✔...
  • Page 79 Using the Listening Modes—Continued Stereo Source (2/2) ✔: Available Listening Modes Speaker layout Listening Mode Button PLII/PLIIx ✔ ✔ Game* THX Games PLII/PLIIx Game ✔ Audyssey DSX* PLllz Height ✔ THX Games Neural THX ✔ ✔ Games PLII Game ✔ Ultra2 Games PLIIz Height ✔...
  • Page 80 Using the Listening Modes—Continued 5.1 channel Sources (1/3) ✔: Available Listening Modes Speaker layout Listening Mode Button ✔ ✔ ✔ ✔ Pure Audio* ✔ ✔ ✔ ✔ Direct ✔ ✔ ✔ ✔ Stereo ✔ ✔ ✔ ✔ Mono DolbyDigital/ DolbyDigital Plus/TrueHD/ Multichannel/ DTS/...
  • Page 81 Using the Listening Modes—Continued 5.1 channel Sources (2/3) ✔: Available Listening Modes Speaker layout Listening Mode Button PLIIx Music ✔ THX Music PLIIx Music ✔ Audyssey DSX PLIIz Height ✔ THX Music Neo:6 ✔ THX Music Neural THX ✔ Music ✔...
  • Page 82 Using the Listening Modes—Continued 5.1 channel Sources (3/3) ✔: Available Listening Modes Speaker layout Listening Mode Button T-D (Theater- ✔ ✔ ✔ ✔ Dimensional) DTS Surround ✔ ✔ ✔ ✔ Sensation Notes: *1 For 7ch output, output can be switched between Front high or Front wide speakers by pressing the [SP LAYOUT] button (depending on the “Speaker Configuration”...
  • Page 83 Using the Listening Modes—Continued 7.1 channel Sources ✔: Available Listening Modes Speaker layout Listening Mode Button ✔ ✔ ✔ ✔ Pure Audio* ✔ ✔ ✔ ✔ Direct ✔ ✔ ✔ ✔ Stereo ✔ ✔ ✔ ✔ Mono Multichannel/ DolbyDigital Plus/TrueHD/ DTS-HD High Resolution ✔...

  • Page 84: About The Listening Modes

    Using the Listening Modes—Continued Notes: *1 For 7ch output, output can be switched between Front high or Front wide speakers by pressing the [SP LAYOUT] button (depending on the “Speaker Configuration” setting (see page 90)). *2 For 9ch output, output can be switched between the combination of Surround back and Front high, or Surround back and Front wide speakers by pressing the [SP LAYOUT] button.
  • Page 85 Using the Listening Modes—Continued 5.1-channel source + Dolby EX DTS Neo:6 These modes expand 5.1-channel sources for 6.1/7.1- This mode expands any 2-channel source for up to 7.1- channel playback. They’re especially suited to Dolby EX channel playback. It uses seven full-bandwidth channels soundtracks that include a matrix-encoded surround of matrix decoding for matrix-encoded material, provid- back channel.
  • Page 86 THX Modes carefully optimize the tonal and spatial characteristics of the soundtrack for reproduction in the Onkyo Original DSP Modes home-theater environment. They can be used with 2- channel matrixed and multichannel sources. Orchestra...

  • Page 87: Advanced Setup

    Advanced Setup Onscreen Setup Menus The onscreen setup menus appear on the connected TV and provide a convenient way to change the AV receiver’s various settings. Settings are organized into nine categories on the main menu, most containing a submenu. Main menu Submenus pages 88–89...

  • Page 88: Input/Output Assign

    Advanced Setup—Continued Input/Output Assign This section explains items on the “Input/Output Assign” menu. Press the [RECEIVER] button followed by Use the Up and Down [ ]/[ ] buttons to the [SETUP] button. select setting, and then use the Left and Right [ ]/[ ] buttons to set them.
  • Page 89 Advanced Setup—Continued Component Video Input See “Component Video Input Setup” on page 50. Digital Audio Input See “Digital Audio Input Setup” on page 51. Analog Audio Input Multich See “Analog Audio Input Setup” on page 52. Subwoofer Input Sensitivity 0 dB (default), 5 dB, 10 dB, 15 dB Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal.

  • Page 90: Speaker Setup

    Advanced Setup—Continued Speaker Setup ® Some of the settings in this section are set automatically by Audyssey MultEQ XT Room Correction and Speaker Setup (see page 56). ® Here you can check the settings made by Audyssey MultEQ XT Room Correction and Speaker Setup, or set them ®...
  • Page 91 Advanced Setup—Continued 1ch: Select if only one surround back L speaker is connected. Surr Back Ch 2ch: Select if two (left and right) surround back speakers are connected (default). LPF of LFE (Low-Pass Filter for the LFE Channel) 80Hz(THX) (default), 90Hz, 100Hz, 120Hz ®...
  • Page 92 Advanced Setup—Continued Speaker Distance ® This setting is set automatically by Audyssey MultEQ XT Room Correction and Speaker Setup (see page 56). Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the listener’s ears as the sound designer intended.
  • Page 93 Advanced Setup—Continued Equalizer Settings ® This setting is set automatically by Audyssey MultEQ XT Room Correction and Speaker Setup (see page 56). With the Equalizer settings, you can adjust the tone of speakers individually with a 7-band equalizer. The volume of each speaker can be set on this page.
  • Page 94 Advanced Setup—Continued THX Audio Setup ® This setting is not set automatically by Audyssey MultEQ XT Room Correction and Speaker Setup (see page 56). With the “SurrBack Sp Spacing” setting, you can specify the distance between your surround back speakers. If you’re using a THX-certified subwoofer, set the “THX Ultra2/Select2 Subwoofer”...

  • Page 95: Audio Adjust

    Advanced Setup—Continued Audio Adjust With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. Press the [RECEIVER] button followed by Use the Up and Down [ ]/[ ] buttons to the [SETUP] button. select setting, and then use the Left and Right [ ]/[ ] buttons to set them.
  • Page 96 Advanced Setup—Continued Dolby PLIIx Music (2ch Input) These settings apply to only 2-channel stereo sources. If you’re not using any surround back speakers, these settings apply to Dolby Pro Logic II, instead of Dolby Pro Logic IIx. Panorama On: Panorama function on. Off: Panorama function off (default).
  • Page 97 Advanced Setup—Continued Audyssey For “Dynamic EQ”, “Reference Level” and “Dynamic Volume”, you cannot change the settings before completing ® Audyssey MultEQ XT Room Correction and Speaker Setup. Dynamic EQ Off: Audyssey Dynamic EQ™ off (default). On: Audyssey Dynamic EQ™ on. With Audyssey Dynamic EQ™, you can enjoy great sound even when listening at low volume levels.
  • Page 98 Advanced Setup—Continued Theater-Dimensional Listening Angle Wide: Select if the listening angle is greater than 30 degrees (default). Narrow: Select if the listening angle is less than 30 degrees. With this setting, you can optimize the Theater-Dimen- Front left speaker Front right speaker sional listening mode by specifying the angle of the front left and right speakers relative to the listening position.

  • Page 99: Source Setup

    Advanced Setup—Continued Source Setup This section explains items on the “Source Setup” menu. Items can be set individually for each input selector. Press the input selector buttons to select Use the Up and Down [ ]/[ ] buttons to an input source. select an item, and then press [ENTER].
  • Page 100 Advanced Setup—Continued Name Edit You can enter a custom name for each individual input selector (excluding TUNER) and radio preset for easy identi- fication. When entered, the custom name will appear on the display. Notes: • To name a radio preset, use the [TUNER] button to select AM or FM, and then select the preset (see step 1 on page 69).
  • Page 101 Advanced Setup—Continued Zoom Mode This setting determines the aspect ratio. Note: When the “Game Mode” is set to “On”, the “Zoom Mode” is fixed at “Full”. Normal: Full: (default) Zoom: Wide Zoom: Auto: According to the input signals and monitor output setting, the AV receiver automati- cally selects the Normal, Full, or Zoom mode.
  • Page 102 Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from the receiver. Accordingly, Onkyo recommends that setup and calibration be performed by an ISF Certified installation technician.
  • Page 103 Advanced Setup—Continued –50 to +50 (default: 0) Brightness With this setting you can adjust the picture brightness. “–50” is the darkest. “+50” is the brightest. –50 to +50 (default: 0) Contrast With this setting you can adjust contrast. “–50” is the least. “+50” is the greatest. –20 to +20 (default: 0) With this setting you can adjust the red/green balance.

  • Page 104: Assigning Listening Modes To Input Sources

    Advanced Setup—Continued Assigning Listening Modes to Input Sources You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes during playback, but the mode specified here will be resumed once the AV receiver has been set to Standby.

  • Page 105: Miscellaneous (Volume/Osd) Setup

    Advanced Setup—Continued Miscellaneous (Volume/OSD) Setup This section explains the items on the “Miscellaneous” menu. Press the [RECEIVER] button followed by Use the Up and Down [ ]/[ ] buttons to the [SETUP] button. select an item, and then press [ENTER]. The main menu appears onscreen.

  • Page 106: Hardware Setup

    Advanced Setup—Continued OSD Setup Immediate Display On: Displayed (default). Off: Not displayed. This preference determines whether operation details are displayed onscreen when an AV receiver function is adjusted. Even when “On” is selected, operation details may not be output if the input source is connected to an HDMI Display Position Bottom: Bottom of the screen (default).
  • Page 107 1, 2, 3 When several Onkyo components are used in the same room, their remote ID codes may overlap. To differen- tiate the AV receiver from the other components, you can change its remote ID from 1, the default, to 2 or 3.
  • Page 108 Advanced Setup—Continued HDMI Audio TV Out Off: HDMI audio is not output to TV (default). On: HDMI audio is output to TV and the sound will be heard from the TV speakers. This preference determines whether audio received at the HDMI input is output from the HDMI outputs. You may want to turn this preference on if your TV is connected to the HDMI output and you want to listen to the audio from a component that’s connected to an HDMI input, through your TV’s speakers.
  • Page 109 , which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between...
  • Page 110 NET: You can update the firmware via Internet. Check the network connection before update. You can update the Onkyo dock’s firmware. Do not shutdown the power of the AV receiver while update. Note: This update shall not be performed when no dock is connected to UNIVERSAL PORT jack.

  • Page 111: Lock Setup

    Advanced Setup—Continued Lock Setup Digital Input Signal Formats With this preference, you can protect your settings by The digital input signal formats are available only for the locking the setup menus. input sources that you have assigned a digital input jack (see page 51).

  • Page 112: Using The Audio Settings

    Advanced Setup—Continued Using the Audio Settings You can change various audio settings by pressing the [AUDIO] button. Press the [RECEIVER] button followed by the [AUDIO] button. The audio setting items appear on the display. RECEIVER Use the Up and Down [ ]/[ ] buttons to select an item.
  • Page 113 Advanced Setup—Continued Re-EQ Function With the Re-EQ function, you can compensate a soundtrack whose high-frequency content is too harsh, making it more suitable for home theater viewing. Re-EQ Off: Re-EQ Function off (default). On: Re-EQ Function on. This function can be used with the following listening modes: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Multichannel, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Express, DSD, Dolby EX, Dolby Pro Logic IIz Height, Dolby PLIIx Movie, Neo:6 Cinema, 5.1-channel source + Neo:6, and Neural Surround.
  • Page 114 Advanced Setup—Continued Speaker Levels You can adjust the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made here, go to “Level Calibration” on page 92 before setting the AV receiver to Standby. –15.0 dB to +12.0 dB (default: 0.0 dB) Subwoofer 1 –15.0 dB to +12.0 dB (default: 0.0 dB)

  • Page 115: Net

    • Depending on your ISP, you may need to specify a About NET proxy server to use Internet radio. If your computer is configured to use a proxy server, use the same settings The AV receiver is network-ready, which means you can for the AV receiver (see page 121).

  • Page 116: Listening To Internet Radio

    AV receiver, so if you (email address and password) on the find that you can’t connect to the http://onkyo.vtuner.com/ portal. To verify your MAC AV receiver, recheck the Address, please see Network Settings (page 121). AV receiver’s IP address on “Net- work”...

  • Page 117: Playing Music Files On A Server

    NET—Continued Playing Music Files on a Server Use the Up and Down [ ]/[ ] buttons to select an item, and This section explains how to play music files on a com- then press [ENTER]. puter or media server through the AV receiver. See A list of music files appears.
  • Page 118 NET—Continued Windows Media Player 11 Setup Random Playback The Random function can only be set while the PLAY This section explains how to configure Windows Media screen is displayed. Player 11 so that the AV receiver can play the music files To play songs in random order, during playback (or stored on your computer.
  • Page 119 NET—Continued ■ AAC Supported Audio File Formats AAC stands for MPEG-2/MPEG-4 Audio. For server playback, the AV receiver supports the fol- • Sampling rates of 8 kHz, 11.025 kHz, 12 kHz, lowing music file formats: MP3, WMA, WAV, FLAC, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, Ogg Vorbis, AAC and LPCM.
  • Page 120 NET—Continued Server Requirements The AV receiver can play digital music files stored on a computer or media server and supports the following technologies: • Windows Media Player 11 • Windows Media Connect 2.0 • DLNA-certified media server If the operating system of your computer is Windows Vista, Windows Media Player 11 is already installed.

  • Page 121: Network Settings

    NET—Continued Network Settings Use the Up and Down [ ]/[ ] buttons to select “5. Network”, Note: and then press [ENTER]. When modifying network settings, after modifying it is The “Network” screen appears. necessary to execute “Save”. 7-5. Network This section explains how to configure the AV receiver’s MAC Address xx : xx : xx −...

  • Page 122: Mac Address

    NET—Continued Mac Address Note: When set to “Enable”, power consumption on standby This is the AV receiver’s MAC (Media Access Control) mode slightly increases. address. This address cannot be changed. ■ Port Number DHCP This is the network port used for control over the net- work.

  • Page 123: Multi Zone

    Multi Zone Multiroom Capability You can use three speaker systems with this AV receiver—a surround-sound speaker system (up to 9.2 channels) in your main listening room, Zone 2: a stereo speaker system in a second room, Zone 3: a stereo speaker system in a third room.

  • Page 124: Connecting Zone 2

    Multi Zone—Continued In addition to your main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a different source for each room. Connecting Your Zone 2 Speakers to an Connecting Zone 2 Amp in Zone 2 There are two ways you can connect Zone 2 speakers:...
  • Page 125 Multi Zone—Continued Zone 2 Video Output The AV receiver features a composite video output for connection to a TV in Zone 2, so you can enjoy both audio and video in that zone. Hookup • Use a composite video cable to connect the AV receiver’s ZONE 2 OUT V jack to a composite video input on your Zone 2 TV.

  • Page 126: Connecting Zone 3

    Multi Zone—Continued Connecting Your Zone 3 Speakers to an Connecting Zone 3 Amp in Zone 3 There are two ways you can connect Zone 3 speakers: This setup allows 9.2-channel playback in your main lis- 1. Connect them directly to the AV receiver. tening room and 2-channel stereo playback in Zone 3, 2.

  • Page 127: Setting The Powered Zone 2/3

    Multi Zone—Continued Setting the Powered Zone 2/3 Use the Up and Down [ ]/[ ] buttons to select “Powered If you’ve connected your Zone 2/3 speakers to the AV Zone2” or “Powered Zone3”, and receiver, as explained in “Connecting Your Zone 2 use the Left and Right [ ]/[ ] Speakers Directly to the AV receiver”...

  • Page 128: Setting The Multi Zone

    Multi Zone—Continued Setting the Multi Zone When you’ve finished, press the [SETUP] button. Press the [RECEIVER] button The setup menu closes. followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn’t appear, make Note: sure the appropriate external input is This procedure can also be performed on the AV receiver selected on your TV.

  • Page 129: Using Zone 2/3

    Multi Zone—Continued Controlling Zone 2/3 with the Remote Using Zone 2/3 Controller This section explains how to turn Zone 2/3 on and off, how to select an input source for Zone 2/3, and how to STANDBY adjust the volume for Zone 2/3. ZONE Controlling Zone 2/3 from the AV receiver INPUT...
  • Page 130 Multi Zone—Continued Muting Zones Notes: • Only analog input sources are output by the ZONE 2/ 3 PRE OUT and ZONE 2/3 L/R speaker terminals. On the remote controller, press Remote Digital input sources are not output. If no sound is controller the [ZONE] button repeatedly, heard when an input source is selected, check if it’s...

  • Page 131: Using The Remote Controller In Zone 2/3 And Multiroom Control Kits

    Multi Zone—Continued Using a Multiroom Kit with a Cabinet Using the Remote Controller in Zone 2/3 and Multiroom Control Kits In this setup, the IR receiver picks up the infrared signals from the remote controller and feeds them to the AV To control the AV receiver with the remote controller receiver located in the cabinet via the connecting block.

  • Page 132: Controlling Other Components

    For details on controlling these components, see the tons to select “8. Remote Con- pages indicated. troller Setup”, and then press [ENTER]. Onkyo DVD player (page 137) Onkyo CD player (page 140) 8. Remote Controller Setup 1. Remote Mode Setup Onkyo cassette recorder with (page 142) 2.
  • Page 133 Controlling Other Components—Continued To use the remote controller, point it at Use the Up and Down [ ]/[ ] but- the AV receiver’s remote control sen- tons to select category, and then sor, as shown below. press [ENTER]. The brand name input panel appears. Transmitter AV receiver 8–1.

  • Page 134: Entering Remote Control Codes

    Controlling Other Components—Continued Entering Remote Control Codes Look up the appropriate remote control code in the separate You’ll need to enter a code for each component that you Remote Control Codes list. want to control. The codes are organized by category (e.g., DVD player, TV, etc.).

  • Page 135: Remote Control Codes For Onkyo Components Connected Via

    Note: If you want to control an Onkyo component by pointing The learning command is also reset. the remote controller directly at it, or you want to control an Onkyo component that’s not connected via...

  • Page 136: Controlling A Tv

    Controlling Other Components—Continued Controlling a TV By pressing the [TV] button that’s been programmed ON, STANDBY, TV [ ] buttons with the remote control code for TV, you can control Set the TV to On or Standby. your TV with the following buttons. TV VOL [ ]/[ ] button For details on entering a remote control code for a differ- Adjust the TV’s volume.

  • Page 137: Controlling A Dvd Player Or Dvd Recorder

    The [DVD/BD] button is preprogrammed with the ON, STANDBY buttons remote control code for controlling an Onkyo DVD Sets the DVD player to On or Standby. player. For details on entering a remote control code for a differ-...

  • Page 138: Controlling A Vcr Or Pvr

    Controlling Other Components—Continued • If you enter the remote control code for a HD DVD or PLAY MODE button* Blu-ray player that has A, B, C, and D or colored but- Selects play modes on components with selectable tons, the [SEARCH], [REPEAT], [RANDOM], and play modes.

  • Page 139: Controlling A Satellite Receiver Or Cable Receiver

    Controlling Other Components—Continued Controlling a Satellite Receiver or Cable Receiver By pressing the REMOTE MODE button that’s been ON, STANDBY buttons programmed with the remote control code for your sat- Set the component to On or Standby. ellite receiver, cable receiver, or DVD recorder (DBS/ GUIDE button PVR combination or cable/PVR combination), you can Displays the onscreen program guide.

  • Page 140: Controlling A Cd Player, Cd Recorder Or Md Recorder

    Used to navigate menus and select items. The [CD] button is preprogrammed with the remote con- SETUP button trol code for controlling an Onkyo CD player. Used to access the Onkyo CD player’s settings. For details on entering a remote control code for a differ-...

  • Page 141: Controlling An Ri Dock

    Dock, you can control your iPod in the Dock with the Notes: following buttons. • This button does not turn the Onkyo DS-A2 or For some RI docks, the [ON], [STANDBY] button may DS-A2X RI Dock on or off. not work with a remote control code 82990 •...

  • Page 142: Controlling A Cassette Recorder

    ] buttons The [TV/TAPE] button is preprogrammed with the The Previous [ ] button selects the previous remote control code for controlling an Onkyo cassette track. During playback it selects the beginning of recorder when used with an connection. the current track. The Next [...

  • Page 143: Activities Setup

    Controlling Other Components—Continued Activities Setup Use the Up and Down [ ]/[ ] but- tons to select an item, and use Via onscreen menu, you can specify what actions will be the Left and Right [ ]/[ ] but- taken by the Easy macro command in the Easy macro tons to change the settings.
  • Page 144 Controlling Other Components—Continued On the remote controller press Source Play Enable: Start playback the source the [ENTER] button. of “Enable”. 8–2. Activities Setup My Movie Disable: Start playback the source of “Disable”. This option enables the Source to Wait start playback when the ACTIVI- TIES button is pressed.

  • Page 145: Learning Commands

    MODE button lights up (about 3 and so on are preprogrammed with commands for seconds). controlling Onkyo CD players, cassette decks, and DVD players. However, they can learn new com- mands, and you can restore the preprogrammed com- mands at any time by resetting the remote controller (see page 135).

  • Page 146: Using Normal Macros

    Controlling Other Components—Continued Using Normal Macros When you’ve finished, press the ACTIVITIES button again. You can program the remote controller’s ACTIVITIES The ACTIVITIES button flashes twice. buttons to perform a sequence of remote control actions. If you enter 32 commands, the process Example: will finish automatically.

  • Page 147: Troubleshooting

    [MUTING] button to If you can’t resolve the issue yourself, try resetting unmute the AV receiver (page 64). the AV receiver before contacting your Onkyo • While a pair of headphones is connected to the dealer.
  • Page 148 Troubleshooting—Continued The surround speakers produce no sound • Depending on the input signal, some listening modes • When the DTS Surround Sensation, T-D (Theater- cannot be selected (pages 77 to 83). Dimensional), Stereo or Mono listening mode is Can’t get 6.2/7.2 playback selected, the surround speakers produce no sound.
  • Page 149 Troubleshooting—Continued • With some CD and LD players, you won’t be able to There’s no picture from a source connected to playback DTS material properly even though your an HDMI IN player is connected to a digital input on the AV •...
  • Page 150 • Make sure the correct input is selected on your TV or Can’t control other components the AV receiver. • If it’s an Onkyo component, make sure that the • Some versions of the iPod do not output video. cable and analog audio cable are connected properly.
  • Page 151 Troubleshooting—Continued Recording Others Can’t record The sound changes when I connect my • On your recorder, make sure the correct input is headphones selected. • When a pair of headphones is connected, the listening mode is set to Stereo, unless it’s already set to Stereo, •...
  • Page 152 VIDEO IN2, select the relevant input selector, and back in again. assign it to “IN2”. Onkyo is not responsible for damages (such as CD If the video source is connected to COMPONENT rental fees) due to unsuccessful recordings caused by VIDEO IN3, select the relevant input selector, and the unit’s malfunction.

  • Page 153: Specifications

    Specifications Amplifier Section General Rated Output Power Power Supply North American: AC 120 V, 60 Hz All channels: North American: 135 watts minimum continuous Others: AC 220 - 240 V, 50/60 Hz power per channel, 8 ohm loads, 2 Power Consumption North American: 11.6 A channels driven from 20 Hz to 20 Others: 1060 W...

  • Page 154: Video Resolution Chart

    Video Resolution Chart The following tables show how video signals at different resolutions are output by the AV receiver. ✔: Output NTSC Output HDMI COMPONENT S-VIDEO COMPOSITE Input 1080p 1080i 720p 480p 480i 1080p 1080i 720p 480p 480i 480i 480i ✔...
  • Page 155 Memo...
  • Page 156 Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ Y0907-1 SN 29400052 (C) Copyright 2009 ONKYO CORPORATION Japan. All rights reserved. * 2 9 4 0 0 0 5 2 *...

This manual is also suitable for:

Nr1007 - tx av network receiverTx-nr1007

Table of Contents