Onkyo TX-NR1000 Instruction Manual page 104

Listening Mode Setup —Continued
PLIIx Music: Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Music
mode.
NEO:6: Plays a 5.1ch source as a 6.1 or higher channel
source using the DTS NEO:6 mode.
Off (Default): Plays an original 5.1ch source as it is.
c. Re-EQ
This option allows you to configure whether the Re-EQ
effect is applied or not. Use this effect when you do not
want to overemphasize the treble sound.
Off (Default): The effect is not applied.
On: Adjusts the soundtrack in which the treble is
overemphasized, so that the sound is optimized for
home theater.
d. Front Speaker
This option configures the front speakers to use when
the TX-NR1000/TX-NR5000E plays DVD-Audio.
Select the speaker terminals to which the speakers you
want to use are connected. This setting can be made
when the "(Speaker B) Front L/R" is set to "Main A" in
the Speaker Configuration sub-menu.
• When the impedance setting for "Front L/R A" or
"Front L/R B" in the Speaker Impedance sub-menu is
set to "6 ohms" or "4 ohms," the available options will
be "A" and "B."
A (Default): Outputs the source from the speakers
connected to the FRONT L/R SPEAKERS A terminals.
B: Outputs the source from the speakers connected to
the FRONT L/R SPEAKERS B terminals.
A+B: Outputs the source from the speakers connected
to the FRONT L/R SPEAKERS A and FRONT L/R
SPEAKERS B terminals. Note that this option is not
available when the front speakers are in Bi-amp or in
BTL configuration.
e. Center Speaker
This option configures the center speaker to use when
the TX-NR1000/TX-NR5000E plays DVD-Audio.
Select the speaker terminal to which the speaker you
want to use is connected. This setting can be made when
the "(Speaker B) Center" is set to "Main A" in the
Speaker Configuration sub-menu.
• When the impedance setting for "Center A" or
"Center B" in the Speaker Impedance sub-menu is set
to "6 ohms" or "4 ohms," the available options will be
"A" and "B."
A (Default): Outputs the source from the speaker
connected to the CENTER SPEAKERS A terminal.
B: Outputs the source from the speaker connected to the
CENTER SPEAKERS B terminal.
A+B: Outputs the source from the speakers connected
to the CENTER SPEAKERS A and CENTER
SPEAKERS B terminals.
f. Surr L/R Sp
This option configures the surround speakers to use
when the TX-NR1000/TX-NR5000E plays DVD-
104
Audio. Select the speaker terminals to which the
speakers you want to use are connected. This setting can
be made when the "(Speaker B) Surr L/R" is set to
"Main A" in the Speaker Configuration sub-menu.
• When the impedance setting for "Surr L/R A" or "Surr
L/R B" in the Speaker Impedance sub-menu is set to
"6 ohms" or "4 ohms," the available options will be
"A" and "B."
A (Default): Outputs the source from the speakers
connected to the SURR L/R SPEAKERS A terminals.
B: Outputs the source from the speakers connected to
the SURR L/R SPEAKERS B terminals.
A+B: Outputs the source from the speakers connected
to the SURR L/R SPEAKERS A and SURR L/R
SPEAKERS B terminals.
g. Surr Bk Speaker
This option configures the surround back speakers to
use when the TX-NR1000/TX-NR5000E plays DVD-
Audio. Select the speaker terminals to which the
speakers you want to use are connected. This setting can
be made when the "(Speaker B) Surr Back" is set to
"Main A" in the Speaker Configuration sub-menu.
However, when the "(Speaker A) Surr Back" is set to
"BTL for Front," "Bi-Amp for Front," or "Not Used,"
this setting will not be displayed.
• When the impedance setting for "Surr L/R A" or "Surr
L/R B" in the Speaker Impedance sub-menu is set to
"6 ohms" or "4 ohms," the available options will be
"A" and "B."
• When the settings for "(Speaker A) Surr Back" and
"(Speaker B) Surr Back" in the Speaker Configuration
sub-menu differ, the available options will be "A" and "B."
A (Default): Outputs the source from the speakers
connected to the SURR BACK L/R SPEAKERS A
terminals.
B: Outputs the source from the speakers connected to
the SURR BACK L/R SPEAKERS B terminals.
A+B: Outputs the source from the speakers connected
to the SURR BACK L/R SPEAKERS A and SURR
BACK L/R SPEAKERS B terminals.
h. Subwoofer
This option configures the subwoofer to use when the
TX-NR1000/TX-NR5000E plays DVD-Audio. Select
the terminal to which the subwoofer you want to use is
connected. This setting can be made when the
"(Speaker A) Subwoofer" is set to an option other than
"Not Used" in the Speaker Configuration sub-menu.
However, when the "(Speaker B) Subwoofer" is set to
an option other than "Main A" in the Speaker
Configuration sub-menu, the available options will be
"A" or "Not Used."
A (Default): Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B: Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.