Connecting A Dvd Player - Onkyo NR3007 - TX AV Network Receiver Instruction Manual

Connecting the AV receiver—Continued

Connecting a DVD Player

See "Connecting Components with HDMI" on page 30 for HDMI connection information.
Step 1: Video Connection
Choose a video connection that matches your DVD player ( ,
You must connect the AV receiver to your TV via the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches your DVD player ( ,
• With connection
• To enjoy Dolby Digital and DTS, use connection
and , or
a b a
• If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the
main left and right outputs for connection
Connection
A
B
C
a
b
c
36
, you can listen to and record audio from your DVD player or listen in Zone 2 or Zone 3.
a
and .)
c
AV receiver
COMPONENT VIDEO IN 1 (DVD/BD)
DVD/BD IN S
DVD/BD IN V
DVD/BD IN L/R
DIGITAL COAXIAL IN 1 (DVD/BD)
DIGITAL OPTICAL IN 1 (GAME)
b c
L R
COAXIAL OPTICAL AUDIO
OUT OUT OUT
, or , and then make the connection.
)
A B C
, or
a b c
or . (To record or listen in Zone 2 or Zone 3 as well, use
b c
.
a
Signal flow
⇐
⇐
⇐
⇐
⇐
⇐
When you use connection
need to assign the digital audio input
(see page 56).
S VIDEO VIDEO Y P P
B
OUT OUT COMPONENT VIDEO OUT
), and then make the connection.
DVD player
Component video output
S-Video output
Composite video output
Analog audio L/R output
Digital coaxial output
Digital optical output
a
, you
c
R
DVD player
A
C
B